[email protected]

automated fault detection cable

20 Min Read
EL-Min® self-luminous mining cable represents a breakthrough in industrial safety engineering. Unlike conventional industrial cables that require separate lighting infrastructure or external power systems to mark their locations and identify operational status, the EL-Min cable generates its own illumination continuously while transmitting electrical power. This dual-function capability—power transmission combined with self-powered luminescence—is achieved through advanced electromagnetic induction technology embedded directly into the cable's construction.
Technical Department
on08/04/2026

EL-Min® Self-Luminous Mining Cable

Revolutionary Self-Powered Cable Safety Innovation: Advanced Electromagnetic Induction Converts Transmitted Power into Real-Time LED Illumination Without External Power Supply, Integrated Multi-Fiber Optic Monitoring for Remote Diagnostics, Tinned Copper Corrosion-Resistant Conductors, Class 5 Very Flexible Stranding for Underground Installation, DIN VDE 0250-813 Compliance, Comprehensive Cable Route Visibility, Emergency Location Detection, Personnel Safety Enhancement in Darkness, and Universal Compatibility with Modern Mining Infrastructure and Hazardous Zone Applications
13 Min Read
FABER® (N)3GHSSYCY cable solves the pit equipment power distribution challenge through two integrated innovations: Galvanized Steel Wire Braid Armor (75% minimum coverage): Resists puncture from sharp rocks, crushing from equipment treads (500+ tonne axle loads), and abrasion from rocky terrain. Service life extended 3–5× vs. unarmored cables in identical pit conditions. Integrated Monitoring Core: Continuously measures insulation resistance, detecting degradation 4–8 weeks before insulation failure becomes critical. This early warning enables planned maintenance before unexpected equipment shutdown.
Technical Department
on08/04/2026

FABER® (N)3GHSSYCY

(N)3GHSSYCY is the integrated copper wire monitoring core spun on the first inner sheath. This dedicated conductor continuously measures insulation resistance between phase conductors and ground reference, enabling early warning of insulation degradation. Three-Stage Insulation Degradation Detection Stage 1 – Incipient Degradation (4–8 weeks before failure): Insulation resistance drops from >1000 MΩ to 100–500 MΩ range. Monitoring systems alert maintenance teams; scheduled cable replacement planned during next equipment maintenance window. Stage 2 – Advanced Degradation (1–4 weeks before failure): Resistance drops to 10–50 MΩ. Equipment operations reduced; high-priority replacement initiated (completed within 1–7 days). Stage 3 – Critical Failure (imminent): Resistance drops below 1 MΩ. Equipment immediately shut down; emergency cable replacement executed (8–12 hours typical). Monitoring Core Measurement Technology The monitoring core interfaces to pit electrical control systems via standard 24 VDC measurement electronics. A precision insulation resistance tester (1000 V minimum) measures leakage current across the monitoring core at 30-minute intervals, recording continuous insulation resistance trending. This trending data provides quantitative assessment of cable aging, enabling predictive maintenance planning based on actual cable condition rather than calendar time.