[email protected]

-30°C

4 Min Read
BASKET SPREADER 740 (YSLTOE) is engineered specifically for hoisting and control applications where mechanical flexibility and electrical reliability must coexist in marine environments. Unlike load-bearing structural cables (which prioritize tensile strength), control cables emphasize: Conductor flexibility – Repeated bending over pulleys without mechanical fatigue Insulation integrity – Voltage breakdown resistance under salt-fog corrosion Mechanical damping – Rope-like flexibility to drape naturally in spreader bar frames Environmental barrier – Outer sheath blocks salt, moisture, and UV penetration Core Design Elements: Component Material Specification Function Port Environment Benefit Conductor Flexible red copper Class 6 (IEC 60228) Carries 300/500V power; enables bending flexibility High purity copper resists galvanic corrosion Insulation PVC type YI2 (IEC 60811) Electrical isolation; voltage breakdown resistance (2 kV test) PVC with marine additives prevents salt-induced tracking Central Unit Aramide yarns (Kevlar™ equivalent) Mechanical load-bearing backup; structural integrity Aramide resists moisture & salt; absorbs vibration stress Outer Sheath PUR type 11YM1 (DIN 73377) Environmental barrier; UV/ozone/moisture protection Superior salt-fog resistance; 20+ year marine lifespan
Technical Department
on11/06/2026

什么是 КОВГ / КОВГН：6 kV 单芯高压柔性橡胶电缆

КОВГ 和 КОВГН 是额定电压 6 kV、频率 50 Hz 的单芯高压柔性电缆，执行 ТУ 16.К73.004-88。КОВГ 为铜导体、橡胶绝缘、橡胶护套的内部安装柔性电缆；КОВГН 为同类结构，但采用 耐油且不传播燃烧的护套。该系列用于露天和地下矿山作业中的设备、成套产品和机构内部安装
5 Min Read
What Are UNE 22560 and UNE 22561? Scope, Definitions, and Core Purpose The UNE 22560 and UNE 22561 standards represent the final and often most underestimated element of the Spanish and Latin American underground mining cable ecosystem. Where UNE 22511 and UNE 22512 govern the power distribution cables that energize mining equipment, the 22560 and 22561 standards govern the signal, control, and interlock cables that command and protect that equipment. These are the "nervous system" cables of a mine — the communication network that tells a continuous miner when to advance and when to halt, that triggers emergency stops, that monitors hoisting rope tension on shaft equipment, that controls conveyor sequencing, and that enables the protective interlocking that prevents a piece of equipment from operating unless all safety preconditions are met. UNE 22560 formally defines flexible multi-core cables for underground mining with voltage ratings up to 500 V or 0.6/1 kV, with no metallic armour protection — designed for installation within equipment enclosures, along protected cable trays in main gate roads, or in areas where mechanical damage risk is minimal. UNE 22561 is its armoured sister standard, incorporating steel wire braid or steel tape protection, specified for installation in rough terrain areas where mechanical damage from rock fall, equipment collision, or floor contact is a credible risk. Both standards mandate that the cable be designed as a multi-core concentric stranded bundle — not the parallel-laid three or four conductors common in power cables, but rather seven, twelve, nineteen, or more individually insulated cores twisted concentrically around a central axis, allowing compact packaging of numerous independent control circuits within a single cable jacket. The distinction between these standards is not merely mechanical armour presence or absence. Control cables are tested against an entirely different set of safety criteria than power cables because their failure mode is fundamentally different. A power cable failure results in loss of energy to equipment — dangerous but localized. A control cable failure can disable the interlock system that prevents a continuous miner from advancing into unsafe ground, or can disable the emergency stop circuit that should halt a conveyor if a worker falls into it. A control cable fire, burning in a tightly bundled cable tray with other control cables, must not spread flame between cables because control cables are typically routed in shared ducts and cable carriers where one cable's ignition could cascade to adjacent circuits. Therefore, control cables are tested for bundle flame propagation (EN 60332-3) rather than single-cable flame propagation tests — a more stringent requirement that demands careful attention to outer sheath formulation and cable spacing in bundle installation.
Technical Department
on11/06/2026

什么是 КГЭ, КГЭ-ХЛ, КГЭ-Т, КГЭТ, КГЭН：6 kV 矿山移动设备柔性屏蔽动力电缆

КГЭ、КГЭ-ХЛ、КГЭ-Т、КГЭТ、КГЭН 是额定电压 6 kV 的柔性屏蔽动力电缆，俄文资料定义为“Кабели силовые гибкие экранированные на напряжение 6 кВ”。它们用于露天和地下矿山作业中连接挖掘机、其他移动机构或电气装置到绝缘中性点交流网络，主线芯额定电压 6 kV，辅助线芯 380 V，频率至 50 Hz。该系列通过型号区分普通、耐寒、耐热、热带和地下不延燃等应用方向
4 Min Read
Multi-Purpose Industrial Cable FLEXIDRUM® SPECIAL R 702 Highly Flexible, Customizable Cable for Heavy Appliances & Vertical Use ⚡ Voltage: 0.6/1 kV OR 300/500 V 🔧 Speed: 120 m/min max 🎯 Configurations: 40+ SKUs, fully customizable 🌡️ Temperature: −50 to +90°C Nominal Voltage 0.6/1 kV OR 300/500 V (customer selection) Test Voltage 4 kV / 2 kV Depending on voltage class Max Speed 120 m/min Moderate-speed reeling applications Operating Temp −50 to +90°C Fixed & flexible laying (highest in class) Bending Radius 3×d to 7.5×D Depends on application mode & cable size Configurations 40+ Power, control, signal, fiber-optic integration
Technical Department
on11/06/2026

什么是 КГЭТКШм：1.14 / 3.3 kV 矿用移动机械柔性屏蔽铠装动力电缆

КГЭТКШм 是一种用于 шахтные передвижные машины и механизмы 矿用移动机器和机构的柔性屏蔽动力电缆，适用于主线芯额定交流电压 1.14 kV 和 3.3 kV、频率至 50 Hz 的电网，辅助线芯电压至 380 V。该电缆采用乙丙橡胶基耐热绝缘、可剥离导电橡胶主芯屏蔽、分裂接地线、双层导电耐油内护套、铜钢线束铠装，以及耐油不延燃且耐磨抗撕裂的外护套，是面向矿山移动设备高机械应力环境的强化型电缆
5 Min Read
FLEXIFESTOON® NE-FLAT (NGFLGÖU): Advanced High-Flexibility Anti-Salt Fog Port Cable for Maritime Cargo Handling and Marine Automation Systems Feichun's revolutionary FLEXIFESTOON® NE-FLAT NGFLGÖU flat cable combines extreme high-flexibility architecture with marine-grade anti-salt fog protection, engineered specifically for port automation infrastructure, cargo-handling festoon systems, and maritime equipment control requiring superior corrosion resistance and mechanical reliability through thousands of bending cycles in aggressive saltwater environments.
Technical Department
on11/06/2026

什么是 GOST КГЭЖ ：井下自走车辆用柔性屏蔽动力电缆

КГЭЖ 与 HoldMine КГЭпЖ 是用于地下采矿自走车辆的柔性屏蔽动力电缆，资料将其定义为 Кабели силовые гибкие экранированные для самоходных вагонов。它们服务的不是普通地面移动设备，而是 подземные горные работы 井下采矿作业中带电驱动的 самоходные вагоны 自走车辆。电缆主线芯用于 1140 V、50 Hz 交流动力供电，辅助线芯用于 220 V 辅助回路。其结构采用第 5 类多股铜导体、橡胶绝缘、导电橡胶屏蔽、合成线增强束、成型增强芯和耐油阻燃橡胶护套，核心目标是在狭窄、潮湿、磨损、弯折频繁的井下移动环境中，提供动力供电、辅助控制和屏蔽安全的统一电缆方案