[email protected]

耐油矿用电缆

4 Min Read
Cable visibility in mining operations represents a critical safety factor that directly impacts operational efficiency and worker protection. Underground and surface mining environments present unique challenges including low-light conditions, dust, and the presence of heavy mobile equipment. （电缆可视性是矿山作业中直接影响运营效率和工人安全的关键因素。） Two primary technologies have emerged to address cable visibility challenges: passive reflective coatings and active illumination systems. This technical comparison examines both approaches to assist mining engineers in selecting appropriate solutions for their operational requirements.
Technical Department
on09/02/2026

FeiChun Reflective vs. Luminous Mining CableTF Kable Reflective Technology vs. TENAX-LUMEN Active Illumination

Cable visibility in mining operations represents a critical safety factor that directly impacts operational efficiency and worker protection. Underground and surface mining environments present unique challenges including low-light conditions, dust, and the presence of heavy mobile equipment. （电缆可视性是矿山作业中直接影响运营效率和工人安全的关键因素。） Two primary technologies have emerged to address cable visibility challenges: passive reflective coatings and active illumination systems. This technical comparison examines both approaches to assist mining engineers in selecting appropriate solutions for their operational requirements.
5 Min Read
Type 409 cables represent a specialized category of flexible mining cables designed specifically for demanding applications in material handling equipment, surface mining operations, and industrial environments. These cables are manufactured according to the Australian and New Zealand Standard AS/NZS 2802:2000, which establishes rigorous requirements for reeling and trailing cables used in mining and general industrial applications outside underground coal mining environments. （409型电缆是专为物料搬运设备、露天采矿作业和工业环境中的高要求应用而设计的一类特种柔性矿用电缆。这些电缆按照澳大利亚和新西兰标准AS/NZS 2802:2000制造，该标准对用于煤矿井下以外的采矿和一般工业应用的卷筒电缆和拖曳电缆制定了严格要求。）
Technical Department
on05/02/2026

TENAX-PUR (N)TSCGEH3S I 6 – 10 KV

TENAX-PUR is a premium medium voltage trailing cable engineered specifically for power supply to large mobile mining equipment such as shovels and draglines. The cable features an extremely robust polyurethane (PUR) outer sheath that delivers exceptional performance against abrasion and tearing, maintaining full flexibility even in extreme cold conditions down to -50°C. Available in orange, yellow, or custom colors to meet specific operational requirements. TENAX-PUR 是一种专为大型移动采矿设备（如电铲和拉斗铲）供电而设计的优质中压拖曳电缆。该电缆采用极其坚固的聚氨酯（PUR）外护套，在磨损和撕裂方面提供卓越的性能，即使在低至-50°C的极端寒冷条件下也能保持充分的柔韧性。可提供橙色、黄色或定制颜色以满足特定操作要求。
5 Min Read
PROTOMONT(Z) NSSHKCGEOEU 0.6/1KV is a coal cutter cable designed for free trailing operations in underground mining applications, used as power supply connection cable for mobile equipment such as coal shearers, roadheaders, TBMs, or scoops (LHDs). The (Z) Coal-Cutter cables are specifically designed for free trailing operation and, due to their special galvanized steel wire braiding construction, may be trailed for considerable distances behind the machine during operation. Features very finely stranded tinned copper conductors (Class FS), EPR rubber insulation (PROTOLON 3GI3), galvanized steel wire braiding armour, and polychloroprene (PCP) outer sheath (PROTOFIRM 5GM5). Offers up to 36,000N tensile strength and 150m/min travel speed. Certified by MSHA P-189-4, EAC, and Bosnia-Herzegovina BAS.
Technical Department
on14/01/2026

كابل PROTOMONT(Z) NSSHKCGEOEU 0,6/1KVكابلات قاطعات الفحم لعمليات السحب الحر – التعدين تحت الأرض

PROTOMONT(Z) NSSHKCGEOEU 0.6/1KV 是專為地下採礦作業中的自由拖曳操作設計的採煤機電纜，用於連接採煤機、掘進機、隧道掘進機(TBM)或鏟運機(LHD)等移動設備。(Z)型採煤機電纜專為自由拖曳操作設計，由於其特殊的鍍鋅鋼絲編織結構，可在設備後方拖曳相當長的距離。該電纜採用極細絞鍍錫銅導體（FS類）、EPR橡膠絕緣（PROTOLON 3GI3）、鍍鋅鋼絲編織鎧裝、氯丁橡膠外護套（PROTOFIRM 5GM5）。具有高達36,000N的拉伸強度和150m/min的移動速度。獲得MSHA P-189-4、EAC及波黑BAS等國際認證。
5 Min Read
PROTOMONT(VO) (N)TSKCGEWOEU 1.8/3KV is a medium-voltage coal cutter cable designed for power supply connection to mobile equipment and machines in underground mining applications. The (VO) Coal cutter cables are specifically engineered for use in cable protection chains (cable handler), which are trailed behind the machine and absorb the occurring tensile forces. Featuring finely stranded tinned copper conductors (Class FS), EPR rubber insulation (PROTOLON 3GI3), semi-conductive NBR easy-strip layer, and chlorinated polyethylene (CM/CPE) outer sheath (PROTOFIRM >5GM5), with double-concentric control/PE conductor elements in the outer interstices. Certified by GOST-R/-K/-B (Russia) and MA China.
Technical Department
on14/01/2026

كابل PROTOMONT(VO) (N)TSKCGEWOEU 1,8/3KVكابلات قاطعات الفحم للتشغيل بسلاسل الحماية – التعدين تحت الأرض

Used as power supply connection cable for mobile equipment and machines in underground mining applications, such as coal cutting machines, etc. (VO) Coal cutter cables are designed for use in cable protection chains (cable handler), which are trailed behind the machine and which absorb the thereby occurring tensile forces. Suitable for shearer loaders, continuous miners, loading machines, shuttle cars, and other underground coal mining mobile equipment.