Comprehensive professional guide to the TYPE 241-LED — FeiChun's flagship illuminated mining cable and the most versatile LED-equipped cable certified to AS/NZS 1802:2003 for underground coal mining. With 45 part numbers spanning 1.1 kV through 22 kV, the TYPE 241-LED covers virtually every underground coal feeder and trailing application: continuous miner trailing cables, longwall shearer power feeders, AFC drive feeders, BSL feeders, panel pump cables, and mobile substation HV incoming supply — all with self-powered LED visibility that requires no external DC supplies, no gate end box modifications, and no coupler changes. Where FeiChun's TYPE 275-LED serves shuttle-car reeling duty and the TYPE 260-LED serves armoured feeder duty, the TYPE 241-LED is the workhorse general-purpose illuminated cable for continuous miners and longwall systems — the machines that do the actual cutting and haulage at the coalface. The proprietary FC-TPU™ C-Series sheath (Formula FC-2026-TPU-C1) is specifically formulated for the crushing loads continuous miners and shuttle cars impose when they run over trailing feeders. The semi-conductive elastomeric screen is magnetically transparent, giving the FC-EMH™ induction system 15–20% higher coupling efficiency than braid-screened cables — critical for maintaining reliable LED illumination at partial continuous-miner load or longwall shearer idle. This article covers cable construction, dual energy harvesting architecture, FC-TPU™ C-Series crushing-resistant sheath, four-layer surge protection, complete dimensional and electrical data across all five voltage classes, full standards compliance including QLD CMSH Act and NSW WHS (Mines) Regulation, application scenarios for continuous miners and longwall systems, product selection versus the TYPE 260-LED and TYPE 275-LED, and direct factory procurement from Anhui Feichun Special Cable Co., Ltd.

on19/03/2026

TYPE 241-LED: FeiChun’s Flagship AS/NZS 1802 Certified Self-Powered LED Illuminated Mining Cable for Continuous Miners, Longwall Shearers & Underground Coal Production

Comprehensive professional guide to the TYPE 241-LED — FeiChun’s flagship illuminated mining cable and the most versatile LED-equipped cable certified to AS/NZS 1802:2003 for underground coal mining. With 45 part numbers spanning 1.1 kV through 22 kV, the TYPE 241-LED covers virtually every underground coal feeder and trailing application: continuous miner trailing cables, longwall shearer power feeders, AFC drive feeders, BSL feeders, panel pump cables, and mobile substation HV incoming supply — all with self-powered LED visibility that requires no external DC supplies, no gate end box modifications, and no coupler changes. Where FeiChun’s TYPE 275-LED serves shuttle-car reeling duty and the TYPE 260-LED serves armoured feeder duty, the TYPE 241-LED is the workhorse general-purpose illuminated cable for continuous miners and longwall systems — the machines that do the actual cutting and haulage at the coalface. The proprietary FC-TPU™ C-Series sheath (Formula FC-2026-TPU-C1) is specifically formulated for the crushing loads continuous miners and shuttle cars impose when they run over trailing feeders. The semi-conductive elastomeric screen is magnetically transparent, giving the FC-EMH™ induction system 15–20% higher coupling efficiency than braid-screened cables — critical for maintaining reliable LED illumination at partial continuous-miner load or longwall shearer idle. This article covers cable construction, dual energy harvesting architecture, FC-TPU™ C-Series crushing-resistant sheath, four-layer surge protection, complete dimensional and electrical data across all five voltage classes, full standards compliance including QLD CMSH Act and NSW WHS (Mines) Regulation, application scenarios for continuous miners and longwall systems, product selection versus the TYPE 260-LED and TYPE 275-LED, and direct factory procurement from Anhui Feichun Special Cable Co., Ltd.

Comprehensive professional guide to the TYPE 275-LED — the world's first LED illuminated reeling cable certified to AS/NZS 1802:2003, the mandatory Australian/New Zealand standard for underground coal mining reeling and trailing cables. While FeiChun's TYPE 440-LED, TYPE 450-LED, and TYPE 455-LED trailing cable platforms are certified to AS/NZS 2802:2000 (the general mining cable standard), underground coal mines in Queensland, New South Wales, and New Zealand require cables certified to the more stringent AS/NZS 1802:2003, which imposes additional mandatory requirements for flame propagation, earth-fault loop impedance, pilot-circuit continuity monitoring, and methane atmosphere compatibility. The TYPE 275-LED meets every one of these requirements — bringing self-powered LED illumination to underground coal mine shuttle cars, pumps, and auxiliary equipment for the first time. This article covers the full cable construction with semi-conductive elastomeric cradle screening, the FeiChun® FC-CVD™ capacitive voltage divider with shuttle-car load-tracking enhanced capacitor bank, the proprietary FC-TPU™ S-Series shuttle-car grade translucent sheath (Formula FC-2026-TPU-S2) rated for 50,000+ bending cycles, the FC-SPM™ three-layer surge protection module, complete dimensional and electrical data for all four conductor sizes (16 mm² to 50 mm²), full standards compliance including QLD CMSH Act and NSW WHS (Mines) Regulation, application scenarios for shuttle cars and underground coal pumps, and direct factory procurement from Anhui Feichun Special Cable Co., Ltd.

Technical Department

on19/03/2026

TYPE 275-LED: The World’s First AS/NZS 1802 Certified Self-Powered LED Illuminated Reeling Cable for Underground Coal Mining

Comprehensive professional guide to the TYPE 275-LED — the world’s first LED illuminated reeling cable certified to AS/NZS 1802:2003, the mandatory Australian/New Zealand standard for underground coal mining reeling and trailing cables. While FeiChun’s TYPE 440-LED, TYPE 450-LED, and TYPE 455-LED trailing cable platforms are certified to AS/NZS 2802:2000 (the general mining cable standard), underground coal mines in Queensland, New South Wales, and New Zealand require cables certified to the more stringent AS/NZS 1802:2003, which imposes additional mandatory requirements for flame propagation, earth-fault loop impedance, pilot-circuit continuity monitoring, and methane atmosphere compatibility. The TYPE 275-LED meets every one of these requirements — bringing self-powered LED illumination to underground coal mine shuttle cars, pumps, and auxiliary equipment for the first time. This article covers the full cable construction with semi-conductive elastomeric cradle screening, the FeiChun® FC-CVD™ capacitive voltage divider with shuttle-car load-tracking enhanced capacitor bank, the proprietary FC-TPU™ S-Series shuttle-car grade translucent sheath (Formula FC-2026-TPU-S2) rated for 50,000+ bending cycles, the FC-SPM™ three-layer surge protection module, complete dimensional and electrical data for all four conductor sizes (16 mm² to 50 mm²), full standards compliance including QLD CMSH Act and NSW WHS (Mines) Regulation, application scenarios for shuttle cars and underground coal pumps, and direct factory procurement from Anhui Feichun Special Cable Co., Ltd.

[email protected]

停送电指示煤矿