Type SHD-GC 5kV 4 AWG 3C EPR Mining Trailing Power Cable

**Type SHD-GC 5kV 4 AWG 3C EPR Mining Trailing Power Cable**

**Product Overview:**

The Type SHD-GC 5kV 4 AWG 3C EPR Mining Trailing Power Cable stands as a stalwart companion in the depths of mining operations, delivering robust power transmission and control functionalities amidst the harshest conditions.

Crafted with innovation and resilience, this cable is tailored to meet the exacting demands of mining environments, ensuring uninterrupted performance and enhanced safety.

**Key Components:**

1. **Conductor Core:** Built upon a foundation of 6 AWG through 500 kcmil coated annealed copper conductors, meticulously bunched wires, and rope-lay-stranded per ASTM B172, this cable exemplifies conductivity and flexibility at its finest.

2. **Insulation Integrity:** Ethylene Propylene Rubber (EPR) insulation forms the backbone of this cable's insulation matrix, offering unparalleled protection against the ravages of heat, moisture, steam, and chemical agents, ensuring sustained operational integrity.

3. **Shielding Innovation:** An innovative shield comprising a flexible coated copper/textile braid shield, meticulously applied over non-conducting overlapped tape, fortifies the cable against external interference, preserving signal integrity and operational safety.

4. **Grounding Expertise:** Annealed copper, rope-lay-stranded per ASTM B172, insulated with high-strength yellow polypropylene, serves as the vigilant ground-check conductor, empowering fail-safe monitoring and safeguarding operational continuity.

5. **Enhanced Grounding:** Coated copper, rope-lay-stranded per ASTM B172, with two conductors in direct contact with the flexible copper braid shield, furnishes enhanced grounding, minimizing the perils associated with induced voltages and ensuring operational reliability.

6. **Jacket Fortress:** Enveloping the cable in a reinforced, two-layer, extra-heavy-duty, lead-cured Chlorinated Polyethylene (CPE) jacket, this armor-like shield offers unparalleled protection against mechanical assailants, including cutting, abrasion, and the relentless onslaught of environmental elements.

**Applications:**

- Trailing cables on AC mining equipment

- Compatibility with Bretby-type cable handling devices on longwall shearers

- Deployment in low- and medium-voltage AC circuits where robust shielding is imperative for operational safety

**Features:**

- Flexible insulation shield provides enhanced shock hazard protection

- Exceptional resistance to heat, moisture, oil, chemicals, and radiation

- Unmatched flexibility facilitates seamless handling and installation

- Resilient against cutting, impact, abrasion, flame, and prolonged sunlight exposure

- Superior thermal stability and physical properties across diverse temperature ranges

- Reinforced jacket configuration ensures maximum safeguarding against mechanical damage

**Specifications:**

- Size: 4 AWG

- Number of Conductors: 3

- Conductor Strand: 259

- Ground Conductor AWG Size: 8

- Ground Check AWG Size: 8

- Nominal Insulation Thickness: 0.110 inches / 2.8 mm

- Outside Diameter: 1.68 inches / 42.7 mm

- Current AMPS: 122

- Net Weight: 1.895 lbs per ft

In the unforgiving realm of mining operations, the Type SHD-GC 5kV 4 AWG 3C EPR Mining Trailing Power Cable emerges as a beacon of reliability, resilience, and operational excellence, ensuring seamless power transmission and control in the face of adversity.

Note: This is just part of the standard parameters of our products. Please contact our Engineer if you need more. And the information contained within this webpage is for guidance only and is subject to change without notice or liability. All dimensions and specifications are nominal and are subject to normal manufacturing tolerances. All pictures shown are for illustration purposes only. The actual product may vary. All the information is provided in good faith and is believed to be correct at the time of publication.