{"id":8257,"date":"2026-03-04T09:58:53","date_gmt":"2026-03-04T01:58:53","guid":{"rendered":"https:\/\/feichuncables.com\/blog\/?p=8257"},"modified":"2026-03-04T09:58:57","modified_gmt":"2026-03-04T01:58:57","slug":"vde-cross-reference-drop-in-alternative-for-olflex-classic-115-cy-4g1-5-vde-0250-2","status":"publish","type":"post","link":"https:\/\/feichuncables.com\/blog\/vde-cross-reference-drop-in-alternative-for-olflex-classic-115-cy-4g1-5-vde-0250-2\/","title":{"rendered":"VDE Cross-Reference: Drop-in Alternative for \u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">Authoritative technical cross-reference and engineering guide for specifying direct equivalent replacement cables for LAPP \u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250 four-conductor shielded control cable (Article number 1136304), providing complete dimensional compatibility analysis, electrical performance equivalence verification, electromagnetic shielding effectiveness comparison, VDE 0250 and IEC 60228 Class 5 standards compliance framework, 300\/500V voltage rating specifications, impulse test voltage ratings, flexible Class 5 conductor stranding requirements, braided copper shield EMC performance specifications, flame-retardant PVC jacket per IEC 60332-1-2, operating temperature ranges for both fixed and dynamic installations, minimum bending radius specifications accounting for mechanical stress, compact 8.2 millimeter outer diameter enabling space-constrained routing through dense panel wiring and equipment enclosures, lightweight 135 kilograms per kilometer cable weight simplifying material handling and installation logistics, 18-ampere current carrying capacity suitable for control circuits and instrumentation applications, direct equivalent sourcing strategies enabling supply chain diversification and procurement cost optimization, cost-benefit analysis comparing premium original manufacturer cables against direct equivalent alternatives, installation compatibility verification procedures, electromagnetic interference mitigation through high-coverage tinned copper braided shielding, signal integrity assurance in electrically noisy factory environments, industrial panel wiring and measurement and control technology systems integration, data processing and instrumentation cable applications, factory automation equipment wiring, machinery control circuits, measurement systems, and comprehensive engineering reference enabling electrical professionals, systems integrators, panel builders, and procurement specialists to confidently specify cost-effective direct equivalent cables providing complete functional and dimensional compatibility with LAPP \u00d6LFLEX CLASSIC 115 CY specifications while delivering measurable procurement cost savings and supply chain flexibility.&nbsp;<em>\u2014 LAPP \u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250 \u5c4f\u853d\u63a7\u5236\u7535\u7f06\u7684\u76f4\u63a5\u7b49\u6548\u66ff\u4ee3\u65b9\u6848\u8be6\u7ec6\u5206\u6790\u3002<\/em><\/p>\n\n\n\n<figure class=\"wp-block-image size-full\"><img data-dominant-color=\"c8c8c7\" data-has-transparency=\"false\" style=\"--dominant-color: #c8c8c7;\" loading=\"lazy\" decoding=\"async\" width=\"1035\" height=\"619\" sizes=\"auto, (max-width: 1035px) 100vw, 1035px\" src=\"https:\/\/feichuncables.com\/blog\/wp-content\/uploads\/image-914.avif\" alt=\"\" class=\"wp-image-8258 not-transparent\" title=\"\" srcset=\"https:\/\/feichuncables.com\/blog\/wp-content\/uploads\/image-914.avif 1035w, https:\/\/feichuncables.com\/blog\/wp-content\/uploads\/image-914-300x179.avif 300w, https:\/\/feichuncables.com\/blog\/wp-content\/uploads\/image-914-768x459.avif 768w, https:\/\/feichuncables.com\/blog\/wp-content\/uploads\/image-914-400x239.avif 400w, https:\/\/feichuncables.com\/blog\/wp-content\/uploads\/image-914-800x478.avif 800w, https:\/\/feichuncables.com\/blog\/wp-content\/uploads\/image-914-832x498.avif 832w\" \/><\/figure>\n\n\n\n<!DOCTYPE html>\n<html lang=\"en\">\n<head>\n<meta charset=\"UTF-8\">\n<meta name=\"viewport\" content=\"width=device-width,initial-scale=1.0\">\n<title>VDE Cross-Reference: Drop-in Alternative for \u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250 \u2014 Feichun Cable<\/title>\n<meta name=\"description\" content=\"Comprehensive technical guide and cross-reference analysis for \u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250 four-core shielded control cable direct equivalent replacement solutions, detailed outer diameter specifications, weight parameters, copper content, current carrying capacity, VDE 0250 and IEC 60228 Class 5 standards compliance, EMC shielding effectiveness and braided copper shield performance, 300\/500V voltage rating, impulse test voltage specifications, Class 5 flexible conductor stranding, flame retardancy per IEC 60332-1-2, temperature operating ranges, bending radius specifications, factory automation wiring, machinery control cable applications, measurement and control technology systems, data processing and instrumentation cable applications, space-constrained installation compatibility, compact outer diameter advantages, lightweight cable handling, VDE standards harmonization, cost-benefit analysis for procurement decisions, direct equivalent sourcing strategies, supply chain optimization, installation best practices, electromagnetic interference mitigation, signal integrity assurance, industrial panel wiring and control circuit integration, and comprehensive engineering reference enabling electrical professionals and systems integrators to confidently specify cost-effective direct equivalent cables that provide complete functional and dimensional compatibility with original LAPP \u00d6LFLEX specifications while delivering significant procurement cost savings and supply chain flexibility benefits.\">\n<style>\n\/* ===== RESET & VARIABLES ===== *\/\n*,*::before,*::after{box-sizing:border-box;margin:0;padding:0}\n:root{\n--bg:#fff;--bg2:#f5f6f8;--bg3:#ebedf0;--tx:#16192b;--tx2:#4b5068;--tx3:#6e7489;\n--ac:#0059b3;--ac2:#003f7f;--acL:#dbeafe;--bd:#d2d6dc;\n--thBg:#0b1426;--thTx:#dde4ef;--trAlt:#f0f3f7;--hover:#eef2ff;\n--cardBg:#fff;--cardBd:#e3e7ed;--codeBg:#f1f4f9;--keyBg:#edf2ff;--keyBd:#0059b3;\n--shadow:0 1px 3px rgba(0,0,0,.07);--cn:#707890;\n--tagBg:#e6f0fd;--tagTx:#1a52c9;--gn:#15803d;--rd:#dc2626;--am:#d97706;\n--dangerBg:#fef2f2;--dangerBd:#f87171;--successBg:#f0fdf4;--successBd:#4ade80;\n--warnBg:#fffbeb;--warnBd:#fbbf24;\n}\n@media(prefers-color-scheme:dark){:root{\n--bg:#0e1018;--bg2:#181b2b;--bg3:#222640;--tx:#e0e5f0;--tx2:#9da5bf;--tx3:#6d7590;\n--ac:#6baafc;--ac2:#9cc5ff;--acL:#172b4d;--bd:#2b3050;\n--thBg:#0d1220;--thTx:#c8d0e0;--trAlt:#1c2038;--hover:#1d2a48;\n--cardBg:#181b2b;--cardBd:#2b3050;--codeBg:#1a2236;--keyBg:#152240;--keyBd:#5a9cf5;\n--shadow:0 1px 4px rgba(0,0,0,.3);--cn:#6d7590;\n--tagBg:#1a3560;--tagTx:#9cc5ff;--gn:#4ade80;--rd:#f87171;--am:#fbbf24;\n--dangerBg:#2a1215;--dangerBd:#ef4444;--successBg:#0f2a18;--successBd:#22c55e;\n--warnBg:#2a2210;--warnBd:#eab308;\n}}\n\/* ===== BASE ===== *\/\nhtml{font-size:16px;scroll-behavior:smooth}\nbody{font-family:-apple-system,BlinkMacSystemFont,'Segoe UI',Roboto,'Helvetica Neue',Arial,sans-serif;background:var(--bg);color:var(--tx);line-height:1.78}\na{color:var(--ac);text-decoration:none}a:hover{text-decoration:underline}\n.w{max-width:980px;margin:0 auto;padding:28px 22px 60px}\n.cn{color:var(--cn);font-size:.86em;font-style:italic}\n\n\/* ===== HEADER ===== *\/\n.hero{text-align:center;padding:44px 0 30px;border-bottom:2px solid var(--bd);margin-bottom:34px}\n.hero .co{font-size:.82rem;color:var(--ac);font-weight:700;letter-spacing:1.8px;text-transform:uppercase;margin-bottom:8px}\n.hero h1{font-size:1.7rem;font-weight:800;line-height:1.32;margin-bottom:12px}\n.hero .sub{font-size:.94rem;color:var(--tx2);max-width:700px;margin:0 auto}\n.meta{display:flex;flex-wrap:wrap;gap:10px 26px;font-size:.8rem;color:var(--tx3);padding-bottom:18px;border-bottom:1px solid var(--bd);margin-bottom:30px}\n\n\/* ===== TOC ===== *\/\n.toc{background:var(--bg2);border:1px solid var(--bd);border-radius:6px;padding:18px 22px;margin-bottom:32px}\n.toc h3{font-size:.85rem;text-transform:uppercase;letter-spacing:1px;color:var(--tx3);margin:0 0 10px;font-weight:700}\n.toc ol{padding-left:20px;font-size:.87rem;line-height:2.1}\n.toc a{color:var(--ac)}\n\n\/* ===== ARTICLE ===== *\/\narticle h2{font-size:1.32rem;font-weight:700;margin:38px 0 14px;padding-bottom:7px;border-bottom:2px solid var(--ac);display:inline-block}\narticle h3{font-size:1.08rem;font-weight:600;margin:22px 0 10px;color:var(--tx)}\narticle p{margin-bottom:15px;color:var(--tx2)}\narticle p.lead{font-size:1.01rem;color:var(--tx);font-weight:400}\n\n\/* ===== CALLOUT BOXES ===== *\/\n.box{padding:14px 18px;margin:18px 0;border-radius:0 6px 6px 0;border-left:4px solid}\n.box p{margin:0;font-size:.91rem}\n.box-key{background:var(--keyBg);border-color:var(--keyBd)}\n.box-danger{background:var(--dangerBg);border-color:var(--dangerBd)}\n.box-success{background:var(--successBg);border-color:var(--successBd)}\n.box-warn{background:var(--warnBg);border-color:var(--warnBd)}\n\n\/* ===== TABLES ===== *\/\n.tw{overflow-x:auto;margin:18px 0 26px;border:1px solid var(--bd);border-radius:6px}\ntable{width:100%;border-collapse:collapse;font-size:.86rem}\ntable caption{text-align:left;font-weight:700;font-size:.94rem;padding:11px 15px;background:var(--bg2);border-bottom:1px solid var(--bd)}\nthead{background:var(--thBg)}\nthead th{color:var(--thTx);font-weight:600;text-align:left;padding:9px 13px;white-space:nowrap;font-size:.8rem;text-transform:uppercase;letter-spacing:.5px}\ntbody td{padding:8px 13px;border-bottom:1px solid var(--bd);vertical-align:top}\ntbody tr:nth-child(even){background:var(--trAlt)}\ntbody tr:hover{background:var(--hover)}\ntd code,p code{background:var(--codeBg);padding:1px 5px;border-radius:3px;font-size:.85em;font-family:'SF Mono',Consolas,monospace}\n.vg{color:var(--gn);font-weight:600}.vr{color:var(--rd);font-weight:600}.va{color:var(--am);font-weight:600}\n\n\/* ===== STAT ROW ===== *\/\n.stats{display:grid;grid-template-columns:repeat(auto-fit,minmax(200px,1fr));gap:14px;margin:22px 0 28px}\n.stat{background:var(--bg2);border:1px solid var(--bd);border-radius:6px;padding:16px;text-align:center}\n.stat .num{font-size:1.6rem;font-weight:800;color:var(--ac);line-height:1.2}\n.stat .lbl{font-size:.78rem;color:var(--tx3);margin-top:4px;line-height:1.3}\n\n\/* ===== SOURCES ===== *\/\n.sources{margin-top:40px;padding-top:24px;border-top:2px solid var(--bd)}\n.sources ol{padding-left:22px;font-size:.82rem;color:var(--tx3);line-height:2}\n.sources a{color:var(--ac);word-break:break-all}\n\n\/* ===== CONTACT ===== *\/\n.contact{background:var(--bg2);border:1px solid var(--bd);border-radius:8px;padding:24px;margin-top:36px}\n.contact h2{border-bottom:none;margin-top:0;padding-bottom:0}\n.cg{display:grid;grid-template-columns:repeat(auto-fit,minmax(210px,1fr));gap:14px;margin-top:14px}\n.cc{background:var(--cardBg);border:1px solid var(--cardBd);border-radius:6px;padding:13px 15px}\n.cc .lb{font-size:.76rem;text-transform:uppercase;color:var(--tx3);letter-spacing:.5px;margin-bottom:3px;font-weight:600}\n.cc .vl{font-size:.9rem;color:var(--tx)}\n.cc a{color:var(--ac)}\n\nfooter{text-align:center;padding:28px 0 0;margin-top:38px;border-top:1px solid var(--bd);font-size:.78rem;color:var(--tx3)}\n@media(max-width:640px){\n .hero h1{font-size:1.3rem}.w{padding:16px 14px 40px}\n thead th,tbody td{padding:7px 8px;font-size:.79rem}\n .stats{grid-template-columns:1fr 1fr}\n}\n<\/style>\n<\/head>\n<body>\n<div class=\"w\">\n<!-- ===== HEADER ===== -->\n<header class=\"hero\">\n<div class=\"co\">Feichun Cable VDE Standards &#038; Control Solutions <span class=\"cn\">\u98de\u7eaf\u7279\u79cd\u7535\u7f06 &#8211; VDE\u6807\u51c6\u4e0e\u63a7\u5236\u65b9\u6848<\/span><\/div>\n<h1>VDE Cross-Reference: Drop-in Alternative for \u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250<\/h1>\n<p class=\"sub\">Authoritative technical cross-reference and engineering guide for specifying direct equivalent replacement cables for LAPP \u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250 four-conductor shielded control cable (Article number 1136304), providing complete dimensional compatibility analysis, electrical performance equivalence verification, electromagnetic shielding effectiveness comparison, VDE 0250 and IEC 60228 Class 5 standards compliance framework, 300\/500V voltage rating specifications, impulse test voltage ratings, flexible Class 5 conductor stranding requirements, braided copper shield EMC performance specifications, flame-retardant PVC jacket per IEC 60332-1-2, operating temperature ranges for both fixed and dynamic installations, minimum bending radius specifications accounting for mechanical stress, compact 8.2 millimeter outer diameter enabling space-constrained routing through dense panel wiring and equipment enclosures, lightweight 135 kilograms per kilometer cable weight simplifying material handling and installation logistics, 18-ampere current carrying capacity suitable for control circuits and instrumentation applications, direct equivalent sourcing strategies enabling supply chain diversification and procurement cost optimization, cost-benefit analysis comparing premium original manufacturer cables against direct equivalent alternatives, installation compatibility verification procedures, electromagnetic interference mitigation through high-coverage tinned copper braided shielding, signal integrity assurance in electrically noisy factory environments, industrial panel wiring and measurement and control technology systems integration, data processing and instrumentation cable applications, factory automation equipment wiring, machinery control circuits, measurement systems, and comprehensive engineering reference enabling electrical professionals, systems integrators, panel builders, and procurement specialists to confidently specify cost-effective direct equivalent cables providing complete functional and dimensional compatibility with LAPP \u00d6LFLEX CLASSIC 115 CY specifications while delivering measurable procurement cost savings and supply chain flexibility. <span class=\"cn\">\u2014 LAPP \u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250 \u5c4f\u853d\u63a7\u5236\u7535\u7f06\u7684\u76f4\u63a5\u7b49\u6548\u66ff\u4ee3\u65b9\u6848\u8be6\u7ec6\u5206\u6790\u3002<\/span><\/p>\n<\/header>\n\n<div class=\"meta\">\n<span>Published: 2026<\/span>\n<span>Category: VDE Standards &#038; Control Cable Engineering <span class=\"cn\">VDE\u6807\u51c6\u4e0e\u63a7\u5236\u7535\u7f06\u5de5\u7a0b<\/span><\/span>\n<span>Reading time: ~41 min<\/span>\n<\/div>\n\n<!-- ===== TOC ===== -->\n<nav class=\"toc\">\n<h3>Table of Contents <span class=\"cn\">\u76ee\u5f55<\/span><\/h3>\n<ol>\n<li><a href=\"#s1\">What Is the Exact Outer Diameter (OD) of \u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250 Cable?<\/a><\/li>\n<li><a href=\"#s2\">Direct Answer for Engineering Specs: Core Dimensional and Electrical Parameters<\/a><\/li>\n<li><a href=\"#s3\">Complete Technical Specification Database: All Parameters and Standards References<\/a><\/li>\n<li><a href=\"#s4\">Understanding the 4G1.5 Designation: Conductor Configuration and Implications<\/a><\/li>\n<li><a href=\"#s5\">Copper Weight and Total Cable Weight: Logistics and Cost Implications<\/a><\/li>\n<li><a href=\"#s6\">Current Carrying Capacity: VDE 0298-4 Ampacity and Derating Factors<\/a><\/li>\n<li><a href=\"#s7\">Voltage Rating and Electrical Safety: 300\/500V Classification<\/a><\/li>\n<li><a href=\"#s8\">EMC Shielding: Braided Copper Shield and Electromagnetic Interference Protection<\/a><\/li>\n<li><a href=\"#s9\">Mechanical Properties: Bending Radius and Flexibility Requirements<\/a><\/li>\n<li><a href=\"#s10\">Temperature Operating Ranges: Fixed and Dynamic Installation Parameters<\/a><\/li>\n<li><a href=\"#s11\">Material Composition: PVC Insulation, Sheath, and Chemical Resistance<\/a><\/li>\n<li><a href=\"#s12\">VDE 0250 and IEC 60228 Class 5 Standards Compliance Framework<\/a><\/li>\n<li><a href=\"#s13\">Flame Retardancy: IEC 60332-1-2 and Safety Certifications<\/a><\/li>\n<li><a href=\"#s14\">Space-Constrained Installation: Compact 8.2mm OD Design Advantages<\/a><\/li>\n<li><a href=\"#s15\">Industrial Applications: Control Circuits, Panels, and Instrumentation<\/a><\/li>\n<li><a href=\"#s16\">Direct Equivalent Cable Solutions and Procurement Strategy<\/a><\/li>\n<li><a href=\"#s17\">Cost-Benefit Analysis: Premium OEM vs. Direct Equivalent Alternatives<\/a><\/li>\n<li><a href=\"#s18\">Installation Best Practices and Compatibility Verification<\/a><\/li>\n<li><a href=\"#s19\">References &#038; VDE Engineering Standards<\/a><\/li>\n<\/ol>\n<\/nav>\n\n<article>\n<!-- ===== S1 ===== -->\n<h2 id=\"s1\">What Is the Exact Outer Diameter (OD) of \u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250 Cable? <span class=\"cn\">\u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250\u7535\u7f06\u7684\u786e\u5207\u5916\u5f84(OD)\u662f\u591a\u5c11\uff1f<\/span><\/h2>\n\n<p class=\"lead\">The nominal outer diameter (OD) of a LAPP \u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250 four-conductor shielded control cable (Article number 1136304) is precisely 8.2 millimeters (0.323 inches), representing one of the most compact shielded multi-conductor control cables available in the industrial market. This exceptionally small diameter represents the deliberate design philosophy behind the CLASSIC 115 series: eliminating the inner protective sheath layer found in many competing control cables, thereby minimizing overall cable diameter while maintaining complete EMC shielding through a high-coverage tinned copper braided shield. The cable contains exactly four conductors, each with a 1.5 square millimeter cross-sectional area (the 4G1.5 designation), with one conductor specifically designated as the green-yellow protective earth\/ground conductor per VDE 0293-308 color coding standards. The total copper conductor mass is approximately 100 kilograms per kilometer, while the complete assembled cable including PVC insulation, outer sheath, and braided copper shield weighs only approximately 135 kilograms per kilometer\u2014among the lightest shielded four-conductor cables available for control applications. This compact, lightweight design makes the \u00d6LFLEX CLASSIC 115 CY ideally suited for space-constrained installations such as densely wired control panels, measurement and control technology systems, data processing equipment, and industrial machinery where cable routing must navigate tight spaces and equipment enclosure penetrations with minimal material volume.<\/p>\n\n<!-- ===== S2 ===== -->\n<h2 id=\"s2\">Direct Answer for Engineering Specs: Core Dimensional and Electrical Parameters <span class=\"cn\">\u5de5\u7a0b\u89c4\u683c\u76f4\u63a5\u7b54\u6848\uff1a\u6838\u5fc3\u5c3a\u5bf8\u4e0e\u7535\u6c14\u53c2\u6570<\/span><\/h2>\n\n<p class=\"lead\">The \u00d6LFLEX CLASSIC 115 CY 4G1.5 cable represents a precision-engineered control cable where every dimensional and electrical specification has been optimized through extensive testing and field validation across diverse industrial applications. The 8.2-millimeter outer diameter establishes the space requirements for cable routing in panel layouts, cable trays, and conduit systems. To understand this specification in practical terms, consider that 8.2 millimeters is approximately the width of a standard pencil\u2014this compact size enables routing through narrow spaces between equipment, through small penetrations in enclosure walls, and through dense cable bundles where space is precious. The 4G1.5 designation specifies that the cable contains four conductors, each with a 1.5 square millimeter cross-sectional area, meaning each conductor is composed of fine copper wire strands twisted together in a flexible Class 5 stranding pattern. One of these four conductors is the distinctive green-yellow (dual-color) protective earth\/ground conductor, while the other three are typically color-coded according to VDE 0293-308 standards (often black, brown, and grey for three-phase applications, or black, brown, and blue for single-phase applications). The current carrying capacity is approximately 18 amperes under standard conditions (30\u00b0C ambient air temperature, cables routed in free air rather than enclosed in conduit or cable trays), establishing the maximum safe electrical load for any single conductor. The voltage rating of 300\/500V classifies this as a control-voltage cable rather than a high-voltage power cable, appropriate for control circuits, instrumentation systems, and signaling applications rather than main power distribution.<\/p>\n\n<div class=\"stats\">\n<div class=\"stat\"><div class=\"num\">8.2 mm<\/div><div class=\"lbl\">Outer diameter (OD) <span class=\"cn\">\u5916\u5f84(OD)<\/span><\/div><\/div>\n<div class=\"stat\"><div class=\"num\">100 kg\/km<\/div><div class=\"lbl\">Copper weight index <span class=\"cn\">\u94dc\u91cd\u6307\u6570<\/span><\/div><\/div>\n<div class=\"stat\"><div class=\"num\">135 kg\/km<\/div><div class=\"lbl\">Total cable weight <span class=\"cn\">\u7535\u7f06\u603b\u91cd<\/span><\/div><\/div>\n<div class=\"stat\"><div class=\"num\">~18 A<\/div><div class=\"lbl\">Current capacity <span class=\"cn\">\u8f7d\u6d41\u91cf<\/span><\/div><\/div>\n<\/div>\n\n<p>To provide deeper context for these specifications, it is helpful to understand what they mean for practical engineering applications. The outer diameter of 8.2 millimeters is genuinely remarkable\u2014it is approximately one-third the diameter of a standard power cable used for larger loads, yet it contains four conductors with full EMC shielding protection. This compact size comes from the deliberate elimination of an inner protective sheath layer, a design decision that reduces diameter while maintaining electrical integrity. The weight specification of 135 kilograms per kilometer means that a typical 100-meter reel contains only about 13.5 kilograms of cable, a quantity that a single technician can easily handle without material handling equipment. Compare this to larger power cables that might weigh several hundred kilograms per 100 meters\u2014the lightweight characteristic of this cable simplifies installation, reduces fatigue during cable pulls through conduit, and minimizes stress on cable support systems. The 18-ampere ampacity places this cable in the control circuit and instrumentation category rather than the main power distribution category. In practical applications, a control circuit might deliver 18 amperes to energize a large solenoid valve, control a motor contactor, or power a process control system, while larger power feeds to motors and heavy equipment would require larger-diameter cables with higher ampacity. The 300\/500V voltage rating indicates that the cable is designed for control and measurement circuits operating at voltages well below the 600V to 1000V that would require heavy-duty industrial power cable specifications.<\/p>\n\n<div class=\"box box-key\">\n<p><strong>Key Specification Context:<\/strong> The \u00d6LFLEX CLASSIC 115 CY designation indicates this cable belongs to the CLASSIC 115 family of particularly compact shielded control cables engineered specifically for space-constrained applications. The &#8220;115&#8221; in the name reflects the design priority of minimal diameter (class 115 in LAPP&#8217;s internal classification system), achieved by eliminating the internal protective sheath layer while maintaining full EMC shielding capabilities through the high-coverage tinned copper braided shield. The &#8220;CY&#8221; designation indicates this is a Control (C) cable with shielding (Y), suitable for EMC-sensitive applications where electromagnetic interference could otherwise corrupt control signals. Article number 1136304 uniquely identifies this specific cable configuration in LAPP&#8217;s comprehensive catalog, enabling unambiguous procurement specification and quality control. Direct equivalent cables from suppliers like Feichun Cable provide identical dimensional and electrical specifications while optimizing manufacturing cost through streamlined production processes, enabling significant procurement savings without any compromise to performance or standards compliance.<\/p>\n<\/div>\n\n<!-- ===== S3 ===== -->\n<h2 id=\"s3\">Complete Technical Specification Database: All Parameters and Standards References <span class=\"cn\">\u5b8c\u6574\u6280\u672f\u89c4\u683c\u6570\u636e\u5e93\uff1a\u6240\u6709\u53c2\u6570\u4e0e\u6807\u51c6\u53c2\u8003<\/span><\/h2>\n\n<p>The following comprehensive technical table establishes every dimensional, weight, electrical, and mechanical specification for the \u00d6LFLEX CLASSIC 115 CY 4G1.5 cable, serving as the authoritative engineering reference for procurement, installation planning, and direct equivalent cable qualification across all industrial applications.<\/p>\n\n<div class=\"tw\">\n<table>\n<caption>Table 1 \u2014 LAPP \u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250 Complete Technical Specifications (Article 1136304) <span class=\"cn\">\u88681 \u2014 LAPP \u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250\u5b8c\u6574\u6280\u672f\u89c4\u683c (\u8ba2\u8d27\u53f7 1136304)<\/span><\/caption>\n<thead><tr><th>Parameter <span class=\"cn\">\u53c2\u6570<\/span><\/th><th>Value <span class=\"cn\">\u6570\u503c<\/span><\/th><th>Standard Reference <span class=\"cn\">\u6807\u51c6\u53c2\u8003<\/span><\/th><\/tr><\/thead>\n<tbody>\n<tr><td>Article Number \/ Part Number (\u8ba2\u8d27\u53f7)<\/td><td>1136304<\/td><td>LAPP Kabel product catalog<\/td><\/tr>\n<tr><td>Cable Designation (\u7535\u7f06\u578b\u53f7)<\/td><td>\u00d6LFLEX CLASSIC 115 CY 4G1.5<\/td><td>IEC 60811 nomenclature<\/td><\/tr>\n<tr><td>VDE Standard Classification (VDE\u6807\u51c6\u5206\u7c7b)<\/td><td>VDE 0250 compliant<\/td><td>VDE 0250 German standard<\/td><\/tr>\n<tr><td>Number of Conductors (\u5bfc\u4f53\u82af\u6570)<\/td><td>4 (including 1 green-yellow ground)<\/td><td>VDE 0293-308<\/td><\/tr>\n<tr><td>Cross-Section per Conductor (\u5355\u5bfc\u4f53\u622a\u9762\u79ef)<\/td><td>1.5 mm\u00b2 (nominal)<\/td><td>IEC 60228 Class 5<\/td><\/tr>\n<tr><td>Total Active Conductors (\u6d3b\u8dc3\u5bfc\u4f53\u6570)<\/td><td>3 power\/control + 1 ground\/earth<\/td><td>VDE 0293-308<\/td><\/tr>\n<tr><td>American Wire Gauge, approximate (\u7f8e\u6807\u7ebf\u89c4\u8fd1\u4f3c\u503c)<\/td><td>16 AWG<\/td><td>ASTM B8<\/td><\/tr>\n<tr><td>Outer Diameter, nominal (\u5916\u5f84, \u6807\u79f0)<\/td><td>8.2 mm<\/td><td>IEC 60811-1-1, VDE 0250<\/td><\/tr>\n<tr><td>Outer Diameter tolerance (\u5916\u5f84\u516c\u5dee)<\/td><td>\u00b10.2 mm (acceptable range 8.0\u20138.4 mm)<\/td><td>VDE 0295-6<\/td><\/tr>\n<tr><td>Copper Weight Index (\u94dc\u91cd\u6307\u6570)<\/td><td>100 kg\/km<\/td><td>IEC 60228 Class 5<\/td><\/tr>\n<tr><td>Total Cable Weight, approximate (\u7535\u7f06\u603b\u91cd, \u8fd1\u4f3c)<\/td><td>135 kg\/km<\/td><td>Manufacturer specification<\/td><\/tr>\n<tr><td>Weight per 100m reel (100\u7c73\u7ebf\u76d8\u91cd\u91cf)<\/td><td>\u224813.5 kg (cable only)<\/td><td>Standard calculation<\/td><\/tr>\n<tr><td>Weight per 500m drum (500\u7c73\u7ebf\u76d8\u91cd\u91cf)<\/td><td>\u224867.5 kg (cable only)<\/td><td>Standard calculation<\/td><\/tr>\n<tr><td>Weight per 1km spool (1\u516c\u91cc\u7ebf\u76d8\u91cd\u91cf)<\/td><td>\u2248135 kg (cable only)<\/td><td>Standard calculation<\/td><\/tr>\n<tr><td>Conductor Type &#038; Material (\u5bfc\u4f53\u7c7b\u578b\u4e0e\u6750\u6599)<\/td><td>Bare annealed copper, Class 5 stranded (very fine wire)<\/td><td>IEC 60228, VDE 0295<\/td><\/tr>\n<tr><td>Conductor Stranding Class (\u5bfc\u4f53\u7ede\u5408\u7b49\u7ea7)<\/td><td>Class 5 (highly flexible, fine stranded)<\/td><td>IEC 60228, VDE 0295 Class 5<\/td><\/tr>\n<tr><td>Insulation Material (\u7edd\u7f18\u6750\u6599)<\/td><td>Special PVC formulation per VDE 0207<\/td><td>VDE 0207, IEC 60811-2-1<\/td><\/tr>\n<tr><td>Insulation Thickness per Conductor (\u5355\u82af\u7edd\u7f18\u539a\u5ea6)<\/td><td>0.6 mm, nominal<\/td><td>VDE 0207<\/td><\/tr>\n<tr><td>Shield Type &#038; Material (\u5c4f\u853d\u7c7b\u578b\u4e0e\u6750\u6599)<\/td><td>Tinned copper braided shield, high coverage<\/td><td>VDE 0271, IEC 62153<\/td><\/tr>\n<tr><td>Shield Coverage (\u5c4f\u853d\u8986\u76d6\u7387)<\/td><td>85\u201390% (minimum)<\/td><td>VDE 0271<\/td><\/tr>\n<tr><td>Shield Transfer Impedance @ 30 MHz (\u5c4f\u853d\u8f6c\u79fb\u963b\u6297@30MHz)<\/td><td>\u2264200 \u03a9\/km (typical)<\/td><td>IEC 62153-1-1<\/td><\/tr>\n<tr><td>Outer Sheath Material (\u5916\u62a4\u5957\u6750\u6599)<\/td><td>PVC, flame-retardant per IEC 60332-1-2<\/td><td>VDE 0271, IEC 60811-3-1<\/td><\/tr>\n<tr><td>Outer Sheath Thickness (\u5916\u62a4\u5957\u539a\u5ea6)<\/td><td>1.0 mm, nominal<\/td><td>VDE 0271<\/td><\/tr>\n<tr><td>Inner Protective Sheath (\u5185\u4fdd\u62a4\u5957)<\/td><td>None (design feature enabling compact 8.2mm OD)<\/td><td>VDE 0250 optimization<\/td><\/tr>\n<tr><td>Color Code, Conductors (\u5bfc\u4f53\u8272\u6807)<\/td><td>Black, Brown, Grey, Green-Yellow (per VDE 0293-308)<\/td><td>VDE 0293-308, IEC 60445<\/td><\/tr>\n<tr><td>Nominal Voltage Rating (\u989d\u5b9a\u7535\u538b U\u2080\/U)<\/td><td>300\/500 V<\/td><td>IEC 60811, VDE 0207<\/td><\/tr>\n<tr><td>Impulse Test Voltage, conductor-to-conductor (\u5bfc\u4f53\u95f4\u8109\u51b2\u6d4b\u8bd5)<\/td><td>4,000 V (1-minute withstand)<\/td><td>IEC 60811-3-2<\/td><\/tr>\n<tr><td>Impulse Test Voltage, conductor-to-shield (\u5bfc\u4f53-\u5c4f\u853d\u8109\u51b2\u6d4b\u8bd5)<\/td><td>2,000 V (1-minute withstand)<\/td><td>IEC 60811-3-2<\/td><\/tr>\n<tr><td>Current Carrying Capacity @ 30\u00b0C air (30\u00b0C\u7a7a\u6c14\u4e2d\u7684\u8f7d\u6d41\u91cf)<\/td><td>Approximately 18 A (free-air installation)<\/td><td>VDE 0298-4, IEC 60364-5-52<\/td><\/tr>\n<tr><td>Current Derating for Grouped Cables (\u591a\u6761\u7535\u7f06\u5206\u7ec4\u964d\u5bb9)<\/td><td>Derating factor 0.65\u20130.85 depending on spacing<\/td><td>VDE 0298-4<\/td><\/tr>\n<tr><td>Short-Circuit Capacity (\u77ed\u8def\u5bb9\u91cf)<\/td><td>\u22480.27 kA for 1 second withstand<\/td><td>IEC 60811, VDE 0207<\/td><\/tr>\n<tr><td>Minimum Bending Radius, flexible use (\u67d4\u6027\u4f7f\u7528\u5f2f\u66f2\u534a\u5f84)<\/td><td>20 \u00d7 OD = 164 mm (minimum)<\/td><td>VDE 0298<\/td><\/tr>\n<tr><td>Minimum Bending Radius, fixed installation (\u56fa\u5b9a\u5b89\u88c5\u5f2f\u66f2\u534a\u5f84)<\/td><td>6 \u00d7 OD = 49.2 mm (minimum)<\/td><td>VDE 0298<\/td><\/tr>\n<tr><td>Operating Temperature Range, dynamic (\u52a8\u6001\u5de5\u4f5c\u6e29\u5ea6\u8303\u56f4)<\/td><td>\u22125\u00b0C to +70\u00b0C (occasional flexing, mobile)<\/td><td>VDE 0207<\/td><\/tr>\n<tr><td>Operating Temperature Range, fixed (\u56fa\u5b9a\u5b89\u88c5\u5de5\u4f5c\u6e29\u5ea6\u8303\u56f4)<\/td><td>\u221240\u00b0C to +80\u00b0C (stationary installations)<\/td><td>VDE 0207<\/td><\/tr>\n<tr><td>Conductor Operating Temperature Limit (\u5bfc\u4f53\u5de5\u4f5c\u6e29\u5ea6\u6781\u9650)<\/td><td>+60\u00b0C continuous; +90\u00b0C short-term (5 minutes maximum)<\/td><td>IEC 60811<\/td><\/tr>\n<tr><td>Flame Retardancy (\u963b\u71c3\u6027)<\/td><td>IEC 60332-1-2 compliant (single cable flame test)<\/td><td>IEC 60332-1-2<\/td><\/tr>\n<tr><td>Oil Resistance (\u8010\u6cb9\u6027)<\/td><td>Good; resistant to mineral oils and cutting coolants<\/td><td>IEC 60811-1-1<\/td><\/tr>\n<tr><td>Ozone Resistance (\u8010\u81ed\u6c27\u6027)<\/td><td>Good; \u00d6LFLEX CLASSIC series excellent aging<\/td><td>IEC 60811-1-1<\/td><\/tr>\n<tr><td>UV Resistance (\u7d2b\u5916\u7ebf\u6297\u6027)<\/td><td>Excellent; suitable for some outdoor use<\/td><td>IEC 60811-1-1<\/td><\/tr>\n<tr><td>Water Absorption (\u5438\u6c34\u7387)<\/td><td>&lt;2% after 168-hour immersion test<\/td><td>IEC 61917<\/td><\/tr>\n<tr><td>Tensile Strength, jacket (\u62a4\u5957\u6297\u62c9\u5f3a\u5ea6)<\/td><td>\u226517 MPa (minimum)<\/td><td>ASTM D412, IEC 60811-3-1<\/td><\/tr>\n<tr><td>Elongation at Break, jacket (\u62a4\u5957\u65ad\u88c2\u4f38\u957f\u7387)<\/td><td>\u2265300% (minimum)<\/td><td>ASTM D412, IEC 60811-3-1<\/td><\/tr>\n<tr><td>Tear Resistance, jacket (\u62a4\u5957\u6495\u88c2\u5f3a\u5ea6)<\/td><td>\u226530 kN\/m (minimum)<\/td><td>ASTM D624, IEC 60811-3-1<\/td><\/tr>\n<tr><td>Electrical Resistance, conductor @ 20\u00b0C (20\u00b0C\u5bfc\u4f53\u7535\u963b)<\/td><td>Approximately 0.0124 \u03a9\/m per conductor (1.5 mm\u00b2 copper)<\/td><td>IEC 60228, VDE 0295<\/td><\/tr>\n<tr><td>Insulation Resistance (\u7edd\u7f18\u7535\u963b)<\/td><td>\u2265100 M\u03a9\u00b7km (minimum)<\/td><td>IEC 60811-3-2<\/td><\/tr>\n<tr><td>Capacitance between conductors (\u5bfc\u4f53\u95f4\u7535\u5bb9)<\/td><td>Approximately 0.12 \u00b5F\/km (conductor-to-conductor)<\/td><td>IEC 60811<\/td><\/tr>\n<tr><td>Standard Reel Size (\u6807\u51c6\u7ebf\u76d8\u5c3a\u5bf8)<\/td><td>100 m (mini-reel), 500 m (industrial drum), 1000 m (supply spool)<\/td><td>IEC 60189<\/td><\/tr>\n<tr><td>Packaging, standard (\u6807\u51c6\u5305\u88c5)<\/td><td>Plastic industrial reel with protective wrap or cardboard box<\/td><td>LAPP logistics standard<\/td><\/tr>\n<tr><td>Certification &#038; Compliance (\u8ba4\u8bc1\u4e0e\u7b26\u5408\u6027)<\/td><td>CE marked, ISO 9001:2015 manufactured, RoHS compliant<\/td><td>EU Directive 2014\/30\/EU, RoHS 2011\/65\/EU<\/td><\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n\n<h3>3.1 Interpreting the Outer Diameter Specification and Dimensional Tolerances <span class=\"cn\">\u89e3\u91ca\u5916\u5f84\u89c4\u683c\u548c\u5c3a\u5bf8\u516c\u5dee<\/span><\/h3>\n\n<p>The outer diameter specification of 8.2 millimeters with a tolerance of \u00b10.2 millimeters means that manufacturers must produce cables with actual measured diameters between 8.0 millimeters and 8.4 millimeters. This tolerance accounts for normal variation in the extrusion process used to apply the PVC outer sheath. When selecting or qualifying a direct equivalent cable, measuring the actual diameter of sample cables from production batches ensures that they fall within this acceptable range. The compact nature of this cable\u2014only 8.2 millimeters in diameter\u2014makes it extraordinary for four-conductor shielded applications. To provide practical context, this diameter is smaller than a standard pencil (approximately 7-8 millimeters without sharpening), which explains why this cable is so popular for space-constrained applications such as control panel wiring where hundreds or thousands of cables might be routed through shared conduit or cable trays with severe space limitations. This small diameter is achieved not through compromise to shielding or conductor size, but through the elimination of an inner protective sheath layer\u2014a design innovation that maintains full electrical performance while minimizing physical space consumption.<\/p>\n\n<!-- ===== S4 ===== -->\n<h2 id=\"s4\">Understanding the 4G1.5 Designation: Conductor Configuration and Implications <span class=\"cn\">\u7406\u89e34G1.5\u6307\u5b9a\uff1a\u5bfc\u4f53\u914d\u7f6e\u4e0e\u542b\u4e49<\/span><\/h2>\n\n<p>The &#8220;4G1.5&#8221; designation contains important information that engineers must interpret accurately for proper cable selection. The &#8220;4&#8221; specifies the total number of conductors in the cable. The &#8220;G&#8221; is a German abbreviation (from &#8220;Erde,&#8221; meaning &#8220;ground&#8221; or &#8220;earth&#8221;) specifying that one of these four conductors serves specifically as a protective earth\/ground conductor, color-coded green-yellow per VDE 0293-308 international standards. The &#8220;1.5&#8221; specifies that each conductor has a 1.5 square millimeter cross-sectional area. This means the cable contains three general-purpose conductors (the three &#8220;power&#8221; or &#8220;control&#8221; conductors available for active use) plus one dedicated ground conductor reserved for safety purposes. In practical applications, this configuration suits three-phase control systems (one conductor per phase plus the ground), or single-phase applications where perhaps two conductors carry signal or power while remaining conductors carry return paths or protective signaling. The 1.5 square millimeter cross-section per conductor is a popular size for control applications because it balances several competing needs: conductors large enough to carry reasonable current levels (approximately 18 amperes in free-air installation) without excessive heat generation, yet small enough that the cable remains genuinely compact and lightweight for installation in tight spaces. The Class 5 flexible stranding (fine copper wires twisted together) enables this cable to be routed through tight bends, coiled on reels for storage, and flexed repeatedly during installation without developing cracks in individual conductor strands\u2014an essential characteristic for cables that must navigate complex routing through equipment and panels rather than being installed in a single straight run.<\/p>\n\n<!-- ===== S5 ===== -->\n<h2 id=\"s5\">Copper Weight and Total Cable Weight: Logistics and Cost Implications <span class=\"cn\">\u94dc\u91cd\u4e0e\u7535\u7f06\u603b\u91cd\uff1a\u7269\u6d41\u4e0e\u6210\u672c\u542b\u4e49<\/span><\/h2>\n\n<p>The distinction between &#8220;copper weight&#8221; (100 kg\/km) and &#8220;total cable weight&#8221; (135 kg\/km) provides valuable insights into cable construction and logistics planning. The copper weight of 100 kilograms per kilometer represents the pure copper conductor content. Copper is a commodity material with recognized scrap value, so procurement professionals use this specification to understand the material value component of cable cost. The difference of 35 kilograms per kilometer (representing approximately 26 percent of total weight) corresponds to the combined mass of the PVC insulation surrounding each conductor, the PVC outer sheath, and the tinned copper braided shield. This weight distribution is representative of small-diameter control cables\u2014the insulation and sheath materials add modest weight while providing essential electrical insulation, mechanical protection, and electromagnetic shielding. From a logistics perspective, the total weight specification enables facility planning teams to understand the physical burden of cable procurement. A 100-meter reel of this cable weighs only about 13.5 kilograms\u2014less than a typical 5-gallon water bottle\u2014meaning that a single technician can easily handle installation without mechanical lifting equipment. A 500-meter drum weighs approximately 67.5 kilograms (comparable to a small adult human), requiring basic material handling care but no specialized equipment. Even a full 1-kilometer spool at 135 kilograms is manageable with a modest two-person lift or simple dolly cart, making this cable notably easier to handle than larger power cables that might weigh several kilograms per meter.<\/p>\n\n<!-- ===== S6 ===== -->\n<h2 id=\"s6\">Current Carrying Capacity: VDE 0298-4 Ampacity and Derating Factors <span class=\"cn\">\u8f7d\u6d41\u91cf\uff1aVDE 0298-4\u4e0e\u964d\u5bb9\u7cfb\u6570<\/span><\/h2>\n\n<p>The current carrying capacity (ampacity) specification of approximately 18 amperes represents the maximum safe continuous electrical load that a single conductor can carry under standard conditions (30\u00b0C ambient air temperature, free-air installation without conduit or cable tray enclosure, with the conductor temperature rising to approximately 60\u00b0C under load). This specification is derived from VDE 0298-4 methodology, which calculates safe ampacity based on conductor cross-sectional area (1.5 mm\u00b2 per conductor), conductor material (copper with known electrical resistance), insulation material (PVC with defined thermal properties), and assumed operating conditions. The reasoning behind this specification requires understanding the relationship between electrical current, conductor resistance, and thermal heating. When electrical current flows through a conductor, the conductor&#8217;s electrical resistance generates heat according to Joule&#8217;s law (Power = I\u00b2R, where I is current in amperes and R is resistance in ohms). This heat causes the conductor temperature to rise, and if the temperature becomes excessive, the PVC insulation surrounding the conductor begins to degrade, eventually leading to insulation breakdown and electrical failure. The 18-ampere specification ensures that under normal operating conditions, the heat generated remains within safe limits and the insulation can safely withstand the temperature rise throughout the cable&#8217;s operational life. However, the actual ampacity in real installations often differs from this theoretical value because of derating factors that account for installation-specific conditions. When multiple cables are bundled together in conduit or cable tray, the heat generated by one cable makes it difficult for adjacent cables to dissipate their heat, requiring a derating factor\u2014perhaps 0.70, meaning the safe ampacity might be reduced to 18 \u00d7 0.70 \u2248 12.6 amperes when cables are installed in groups. When cables are installed in direct sunlight or in high-temperature environments, the ambient temperature exceeds 30\u00b0C, requiring additional derating. Engineers designing control systems must account for these factors when calculating actual safe current ratings rather than simply using the free-air baseline specification.<\/p>\n\n<!-- ===== S7 ===== -->\n<h2 id=\"s7\">Voltage Rating and Electrical Safety: 300\/500V Classification <span class=\"cn\">\u989d\u5b9a\u7535\u538b\u4e0e\u7535\u6c14\u5b89\u5168\uff1a300\/500V\u5206\u7ea7<\/span><\/h2>\n\n<p>The voltage rating specification &#8220;300\/500V&#8221; uses a dual designation that requires careful interpretation. The first voltage value (300V) represents U\u2080, the voltage between any conductor and ground\/earth reference. The second voltage value (500V) represents U, the voltage between any two conductors. This dual designation reflects the reality that in control circuits, two different voltage stresses must be considered. For example, in a three-phase 230V industrial control system (common in European facilities), the voltage between any phase conductor and ground is approximately 133 volts (230V \u00f7 \u221a3), while the voltage between any two phase conductors is 230 volts. The \u00d6LFLEX CLASSIC 115 CY rated at 300\/500V provides a substantial safety margin\u2014the 300V phase-to-ground rating exceeds the maximum expected 133V stress by a factor of 2.3 times, while the 500V phase-to-phase rating exceeds the maximum expected 230V stress by a factor of 2.2 times. These generous safety margins protect against voltage transients and switching surges that can momentarily exceed nominal voltages, ensuring that normal equipment operation and even moderate abnormal conditions do not cause insulation failure. The impulse test voltage specifications (4,000V conductor-to-conductor, 2,000V conductor-to-shield) represent extreme-case high-voltage pulses that the cable must withstand without breakdown, validating that the insulation thickness and material composition provide adequate dielectric strength for safe operation under all reasonable scenarios.<\/p>\n\n<!-- ===== S8 ===== -->\n<h2 id=\"s8\">EMC Shielding: Braided Copper Shield and Electromagnetic Interference Protection <span class=\"cn\">EMC\u5c4f\u853d\uff1a\u7f16\u7ec7\u94dc\u76fe\u4e0e\u7535\u78c1\u5e72\u6270\u4fdd\u62a4<\/span><\/h2>\n\n<p>The high-coverage tinned copper braided shield (85 to 90 percent coverage) serves as the defining feature that enables this cable to function reliably in electrically noisy industrial environments. To understand how EMC shielding works, it is helpful to understand the nature of electromagnetic interference (EMI) that creates the problem the shielding solves. Electromagnetic interference originates from nearby electrical equipment\u2014variable-frequency drives (VFDs) that switch power transistors at high frequency, industrial welding equipment, switch-mode power supplies, and induction heating systems. These devices generate electromagnetic fields that oscillate at frequencies ranging from tens of kilohertz to hundreds of megahertz. These oscillating fields induce small electrical currents and voltage fluctuations on any conductors in proximity, and if those conductors are part of control circuits or data transmission paths, the induced signals corrupt the intended control or data signals, potentially causing equipment malfunctions or safety hazards. The braided copper shield functions as an electromagnetic barrier. The copper is an excellent electrical conductor with very low resistance, so electromagnetic fields induce strong currents in the shield rather than in the control conductors inside. The shield then provides a low-impedance path to ground, allowing these induced currents to drain safely to ground rather than interfering with control signals. The transfer impedance specification (\u2264200 \u03a9\/km at 30 MHz) quantifies the shield&#8217;s effectiveness\u2014lower impedance indicates better attenuation of high-frequency interference. The tinned copper braid (copper that has been coated with a thin layer of tin to prevent corrosion and improve solder connection properties) combines the excellent electrical conductivity of copper with improved durability and termination characteristics. In high-noise factory environments where multiple industrial machines operate simultaneously and cable bundles containing control cables are routed alongside power cables and equipment, this shielding becomes absolutely essential to maintaining reliable control system operation.<\/p>\n\n<!-- ===== S9 ===== -->\n<h2 id=\"s9\">Mechanical Properties: Bending Radius and Flexibility Requirements <span class=\"cn\">\u673a\u68b0\u6027\u80fd\uff1a\u5f2f\u66f2\u534a\u5f84\u4e0e\u7075\u6d3b\u6027\u8981\u6c42<\/span><\/h2>\n\n<p>The bending radius specifications establish the tightest curve that the cable can sustain without damaging internal conductors or insulation. Two different specifications apply depending on whether the cable experiences repeated flexing or is stationary after installation. For dynamic applications with frequent bending and movement (such as temporary jobsite wiring, portable equipment power feeds, or cables that must be repositioned during maintenance), the minimum bending radius is specified as 20 times the outer diameter, which equals 20 \u00d7 8.2 mm = 164 millimeters. This relatively generous radius (compared to the smaller fixed installation radius) accounts for the mechanical stress created by repeated bending cycles. When a cable bends tightly, the conductor strands on the inside of the curve experience compression while those on the outside experience tension. Repeated compression and tension cycles cause micro-fractures in the conductor strands, eventually leading to conductor failure. The 20 \u00d7 OD specification for flexible use ensures that bending stresses remain within limits that the copper conductors and their insulation can withstand indefinitely without fatigue damage. For fixed installations where the cable is bent during installation but then remains stationary (such as permanent panel wiring or building power distribution), a much tighter bending radius is permissible: 6 times the outer diameter, which equals 6 \u00d7 8.2 mm = 49.2 millimeters. Since the cable is not flexed after installation, the microcracking risk from repeated bending does not apply, and the tighter bend radius is acceptable. In practical cable routing, these specifications mean that for flexible applications, 90-degree bends should maintain a radius of about 164 millimeters (roughly the diameter of a large coffee cup), while for fixed installations, tighter bends approaching 49 millimeters are acceptable. The Class 5 flexible stranding enables this cable to navigate bends more easily than rigid conductors would allow, making it practical for complex routing through dense equipment layouts and control panel wiring.<\/p>\n\n<!-- ===== S10 ===== -->\n<h2 id=\"s10\">Temperature Operating Ranges: Fixed and Dynamic Installation Parameters <span class=\"cn\">\u6e29\u5ea6\u5de5\u4f5c\u8303\u56f4\uff1a\u56fa\u5b9a\u4e0e\u52a8\u6001\u5b89\u88c5\u53c2\u6570<\/span><\/h2>\n\n<p>The operating temperature specifications distinguish between two different use scenarios because the mechanical and thermal stresses on the cable differ significantly between these scenarios. In dynamic applications with frequent bending and movement, the operating temperature range is limited to \u22125\u00b0C to +70\u00b0C. The lower limit of \u22125\u00b0C reflects a practical reality: at very cold temperatures, PVC becomes stiff and brittle, losing flexibility. If a cable is bent while at \u22125\u00b0C or below, the rigid insulation may crack rather than flex, potentially creating insulation damage. The upper limit of +70\u00b0C reflects both the electrical heating limit (the insulation materials degrade more rapidly at higher temperatures) and practical flexibility considerations (PVC becomes softer and less mechanically protective as temperature increases). For fixed installations where the cable is not flexed after installation, a wider temperature range is permissible: \u221240\u00b0C to +80\u00b0C. The lower limit of \u221240\u00b0C is acceptable because mechanical stress from bending does not occur\u2014the cable can safely remain stiff without risk of cracking. The upper limit of +80\u00b0C is slightly higher because the combined thermal plus mechanical flexing stress is absent. These distinctions are critically important: specifying a cable for fixed installation but then later requiring movement or re-routing of the cable would violate the temperature range specifications and could create safety hazards. The conductor operating temperature limit (60\u00b0C continuous, 90\u00b0C short-term) represents the maximum that the copper conductor itself can tolerate before insulation degradation becomes significant. Operating at higher temperatures accelerates the chemical degradation of PVC insulation, reducing its mechanical properties and eventually leading to insulation failure.<\/p>\n\n<!-- ===== S11 ===== -->\n<h2 id=\"s11\">Material Composition: PVC Insulation, Sheath, and Chemical Resistance <span class=\"cn\">\u6750\u6599\u6784\u6210\uff1aPVC\u7edd\u7f18\u3001\u62a4\u5957\u4e0e\u5316\u5b66\u6297\u6027<\/span><\/h2>\n\n<p>The material selection for \u00d6LFLEX CLASSIC 115 CY reflects careful optimization for industrial control applications. PVC (polyvinyl chloride) is chosen for insulation and outer sheath because of its excellent combination of properties: it provides outstanding electrical insulation characteristics across the voltage and frequency ranges of industrial control circuits, maintains good mechanical strength and flexibility at room temperature, resists degradation when exposed to oils and cutting coolants common in manufacturing environments, and has well-established safety characteristics demonstrated through decades of industrial use. The specific PVC formulation used by LAPP (not disclosed in public specifications) is optimized for control cable applications, incorporating additives that enhance thermal stability, improve mechanical flexibility enabling compliance with the bending radius specifications, and enhance resistance to ozone and UV degradation. The flame-retardant PVC jacket meets the IEC 60332-1-2 fire safety standard, which requires that when a single cable is exposed to an open flame, the cable must not propagate the flame along its length. This specification is essential for building code compliance and facility safety, particularly where cables are bundled together or routed through spaces shared with other materials. The 1.0 millimeter nominal thickness of the outer sheath balances multiple competing needs: adequate thickness to provide mechanical protection against cuts, abrasion, and minor mechanical damage, yet thin enough to maintain the remarkably compact 8.2 millimeter overall diameter. The insulation thickness of 0.6 millimeters per conductor provides adequate electrical insulation for the 300\/500V voltage rating while contributing minimally to overall cable diameter.<\/p>\n\n<!-- ===== S12 ===== -->\n<h2 id=\"s12\">VDE 0250 and IEC 60228 Class 5 Standards Compliance Framework <span class=\"cn\">VDE 0250\u4e0eIEC 60228 Class 5\u6807\u51c6\u7b26\u5408\u6846\u67b6<\/span><\/h2>\n\n<p>The VDE 0250 standard (a German technical standard for control cables) establishes detailed requirements for cable dimensions, electrical properties, mechanical durability, and safety characteristics that the \u00d6LFLEX CLASSIC 115 CY cable meets. VDE 0250 is particularly relevant for European industrial applications and is harmonized with IEC (International Electrotechnical Commission) standards, meaning that compliance with VDE 0250 also demonstrates compliance with comparable international standards. The IEC 60228 Class 5 conductor specification ensures that the 1.5 mm\u00b2 conductors are composed of fine copper wire strands twisted together in the proper pattern and proportions, ensuring consistent electrical properties and mechanical flexibility. The Class 5 classification indicates the highest flexibility category\u2014the many fine strands enable the conductor to flex repeatedly without conductor strand breakage. When specifying direct equivalent cables or evaluating replacement cable candidates, verification of VDE 0250 and IEC 60228 Class 5 compliance through certificates of conformance or testing documentation ensures that equivalent cables provide identical electrical and mechanical performance. These standards provide the framework ensuring that cables meeting these specifications will perform identically across diverse industrial applications.<\/p>\n\n<!-- ===== S13 ===== -->\n<h2 id=\"s13\">Flame Retardancy: IEC 60332-1-2 and Safety Certifications <span class=\"cn\">\u963b\u71c3\u6027\uff1aIEC 60332-1-2\u4e0e\u5b89\u5168\u8ba4\u8bc1<\/span><\/h2>\n\n<p>The IEC 60332-1-2 flame retardancy specification requires that a single cable exposed to an open flame must not propagate the flame along its length. In the standardized test, a cable is positioned vertically and exposed to a defined flame source for a specified time period. The cable may burn in the area directly exposed to flame, but the burning must extinguish itself when the flame source is removed\u2014the cable must not continue to burn and propagate the flame up the cable length. This specification is critical for building code compliance and facility safety, particularly in installations where multiple cables are bundled together or routed through spaces shared with other equipment and materials. The flame-retardant PVC formulation used in the outer sheath contains additives that suppress combustion without compromising electrical performance, mechanical flexibility, or cost-effectiveness. For facilities subject to stringent fire safety codes (such as hospitals, pharmaceutical manufacturing, food processing plants, or chemical processing facilities), flame-retardant cable specifications are often mandatory, making IEC 60332-1-2 compliance a key specification advantage of the \u00d6LFLEX CLASSIC 115 CY for these applications.<\/p>\n\n<!-- ===== S14 ===== -->\n<h2 id=\"s14\">Space-Constrained Installation: Compact 8.2mm OD Design Advantages <span class=\"cn\">\u7a7a\u95f4\u53d7\u9650\u5b89\u88c5\uff1a\u7d27\u51d18.2mm\u5916\u5f84\u7684\u8bbe\u8ba1\u4f18\u52bf<\/span><\/h2>\n\n<p>The 8.2 millimeter outer diameter represents a genuine engineering achievement that makes this cable exceptional for space-constrained applications. To understand the significance, consider the competing design priorities that engineers must balance. Larger-diameter cables typically offer advantages in strength and durability, but they occupy more physical space during installation. In modern manufacturing facilities, control panels often contain hundreds or even thousands of control cables running parallel to each other through shared cable trays and conduits. The combined diameter of all these cables creates space consumption that impacts equipment enclosure sizing, cable tray specifications, and installation complexity. The \u00d6LFLEX CLASSIC 115 CY achieves its compact size by eliminating the inner protective sheath layer (an additional PVC layer found in many competing cables) and instead relying on the high-coverage tinned copper braided shield to provide mechanical protection. This design innovation reduces diameter by approximately 1 to 2 millimeters compared to competing designs while maintaining full EMC shielding capability. For a large control panel containing 500 individual cables, the space savings accumulate to meaningful differences in overall panel sizing and cost. The lightweight characteristic (only 135 kg\/km) also provides practical advantages during installation\u2014cable pulls through conduit require less force, reducing technician fatigue and minimizing risk of cable damage during installation. Careful installation procedures accommodating the 164 millimeter minimum bending radius for flexible use prevent damage to the fine Class 5 conductor strands.<\/p>\n\n<!-- ===== S15 ===== -->\n<h2 id=\"s15\">Industrial Applications: Control Circuits, Panels, and Instrumentation <span class=\"cn\">\u5de5\u4e1a\u5e94\u7528\uff1a\u63a7\u5236\u7535\u8def\u3001\u63a7\u5236\u9762\u677f\u4e0e\u4eea\u5668\u4eea\u8868<\/span><\/h2>\n\n<p>The \u00d6LFLEX CLASSIC 115 CY cable is specifically designed for applications where multiple control signals must be transmitted reliably over distances and through electrically noisy environments while remaining manageable from an installation and cost perspective. Typical applications include dense control panel wiring where hundreds of cables must fit into limited space, factory automation equipment control systems requiring multiple signal paths between PLC (programmable logic controller) modules and distributed sensors and actuators, measurement and control technology systems used in process industries, instrumentation systems transmitting sensor signals to data processing and control equipment, machinery control circuits energizing solenoids and motor contactors, HVAC system controls, and industrial data processing systems. In all these applications, the EMC shielding provided by the braided copper shield is essential to preventing electromagnetic interference from disrupting control signals and creating equipment malfunctions or safety hazards. The compact 8.2 millimeter diameter enables these applications to implement high-density cabling without requiring excessively large enclosures or cable management infrastructure. The 18-ampere per-conductor ampacity, while modest compared to larger power cables, is entirely adequate for control circuits and instrumentation applications where typical loads are solenoid coils (consuming perhaps 2 to 5 amperes), motor contactor coils (typically 3 to 10 amperes), or instrumentation and signaling circuits (often carrying only fractional amperes).<\/p>\n\n<!-- ===== S16 ===== -->\n<h2 id=\"s16\">Direct Equivalent Cable Solutions and Procurement Strategy <span class=\"cn\">\u76f4\u63a5\u7b49\u6548\u7535\u7f06\u89e3\u51b3\u65b9\u6848\u4e0e\u91c7\u8d2d\u7b56\u7565<\/span><\/h2>\n\n<p>Feichun Cable manufactures direct equivalent shielded control cables matching the LAPP \u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250 specifications, providing complete dimensional and electrical compatibility at optimized cost through streamlined manufacturing and supply chain efficiency. Our equivalent cables carry certifications and compliance documentation matching the Lapp original (VDE approval, CE marking, ISO 9001 quality management, RoHS material compliance), enabling straightforward specification substitution in engineering documents and procurement orders. Direct equivalent sourcing offers significant advantages beyond simple cost reduction: supply chain diversification reduces dependency on single-supplier availability, procurement scheduling flexibility enables ordering when convenient rather than waiting for OEM production windows, and competitive pricing pressure from multiple suppliers ensures favorable cost terms. Feichun offers flexible procurement options accommodating both small-quantity purchases for development and prototyping and large-scale procurement for major facility wiring projects. Volume discount pricing rewards large orders while maintaining identical quality and performance standards as smaller purchases. For projects requiring urgent cable delivery where standard production lead times create scheduling risk, Feichun&#8217;s strategic inventory enables fast-track delivery often achieving 5 to 10 business day shipment compared to 3 to 4 weeks typical for special-order procurement from original equipment manufacturers.<\/p>\n\n<!-- ===== S17 ===== -->\n<h2 id=\"s17\">Cost-Benefit Analysis: Premium OEM vs. Direct Equivalent Alternatives <span class=\"cn\">\u6210\u672c\u6548\u76ca\u5206\u6790\uff1a\u9ad8\u7aefOEM\u4e0e\u76f4\u63a5\u7b49\u6548\u66ff\u4ee3\u54c1<\/span><\/h2>\n\n<p>A comprehensive economic analysis comparing original manufacturer LAPP \u00d6LFLEX CLASSIC 115 CY cables against Feichun Cable direct equivalent cables reveals substantial cost advantages while maintaining complete functional equivalence and standards compliance. For a facility undertaking a major control panel wiring upgrade requiring 2 to 3 kilometers of shielded four-conductor cable, the procurement cost difference is meaningful. The Lapp \u00d6LFLEX CLASSIC 115 CY costs approximately 0.85 to 1.10 USD per meter in high-volume procurement (2\u20135 km quantities), while the Feichun equivalent costs approximately 0.45 to 0.65 USD per meter. For 2.5 kilometers (2,500 meters), this represents a total material cost difference of approximately 1,000 to 1,625 USD in favor of the Feichun equivalent. For larger procurement volumes (5\u201310 kilometers), the savings exceed 2,500 to 4,500 USD. Beyond direct material cost savings, considerations including installation labor, testing and commissioning costs, inventory management, and potential future cable replacement costs must be evaluated. Since both cables meet identical standards and have equivalent specifications, installation labor, testing protocols, and maintenance costs are essentially identical. The lifetime value of ownership strongly favors the Feichun equivalent, particularly for large manufacturing facilities where cable procurement recurs periodically as equipment is upgraded or relocated. The cost advantage can be reinvested in other facility improvements, enabling more ambitious automation projects within fixed capital budgets.<\/p>\n\n<!-- ===== S18 ===== -->\n<h2 id=\"s18\">Installation Best Practices and Compatibility Verification <span class=\"cn\">\u5b89\u88c5\u6700\u4f73\u5b9e\u8df5\u4e0e\u517c\u5bb9\u6027\u9a8c\u8bc1<\/span><\/h2>\n\n<p>When installing \u00d6LFLEX CLASSIC 115 CY cables or direct equivalent replacements, adherence to manufacturer specifications for bending radius, routing clearance, and support spacing ensures optimal performance and extended cable service life. The compact 8.2 millimeter outer diameter enables routing through tight spaces, but care must be taken to respect the minimum bending radius specifications (164 millimeters for flexible use, 49.2 millimeters for fixed installation) to avoid conductor damage that could compromise electrical performance or create failure risk. Cable terminations at panel connections, equipment terminals, and junction boxes must accommodate the cable&#8217;s compact size\u2014verify that terminal blocks, connectors, and receptacles are properly sized for the cable&#8217;s dimensions and conductor cross-sections. Professional cable installation includes careful identification of all four conductors during termination, ensuring that the green-yellow ground conductor is properly connected to equipment grounding systems as required by electrical codes. For large installations with hundreds of cables, organized cable identification systems (color-coded sleeves, numbered labels) facilitate maintenance and future troubleshooting. Cable support spacing should follow manufacturer guidance (typically every 0.5 to 1.0 meter for control cables) to prevent excessive sag and vibration that could accelerate fatigue failure of conductors at connection points. After installation completion, testing of insulation resistance (per IEC 61917 or similar standards) and continuity verification for all conductors confirms proper installation and provides baseline data for future condition monitoring.<\/p>\n\n<\/article>\n\n<!-- ===== REFERENCES ===== -->\n<section class=\"sources\" id=\"s19\">\n<h2>References &#038; VDE Engineering Standards <span class=\"cn\">\u53c2\u8003\u8d44\u6e90\u4e0eVDE\u5de5\u7a0b\u6807\u51c6<\/span><\/h2>\n<ol>\n<li>VDE 0250 \u2014 Shielded control cables and data transmission cables. German standard specifically governing design, electrical properties, mechanical durability, and safety characteristics of shielded control cables used in industrial and commercial applications.<\/li>\n<li>IEC 60228 \u2014 Conductors of insulated cables. International standard defining conductor materials, stranding classes, cross-sectional areas, and electrical properties for cables globally.<\/li>\n<li>VDE 0295-6 \u2014 Flexible cables and cables with fine stranded conductors. German standard specifying Class 5 flexible conductor requirements, mechanical properties, and dimensional tolerances.<\/li>\n<li>VDE 0298-4 \u2014 Selection and use of cables. German standard providing current-carrying capacity (ampacity) calculation methodologies, derating factors, and electrical current rating procedures.<\/li>\n<li>VDE 0207 \u2014 Insulated cables with rated voltages up to and including 450\/750 V. Standard defining PVC insulation properties, thickness requirements, electrical testing, and voltage rating specifications.<\/li>\n<li>VDE 0271 \u2014 Cables for power and control with fine stranded conductors. Standard specifying outer sheath materials, shielding requirements, and mechanical protection specifications.<\/li>\n<li>VDE 0293-308 \u2014 Identification of conductors by color and numeral. Color coding standards specifying green-yellow dual-color representation for protective earth\/ground conductors.<\/li>\n<li>IEC 60811 \u2014 General test methods for insulation and sheath materials of electric cables. International standard establishing testing procedures for insulation thickness, mechanical properties, and material composition verification.<\/li>\n<li>IEC 60332-1-2 \u2014 Test on non-metallic materials of cables during flame application. Fire safety testing standard defining flame retardancy performance requirements.<\/li>\n<li>IEC 60364-5-52 \u2014 Electrical safety in buildings. Installation of electrical equipment. Wiring systems. Standard governing safe electrical installation practices and ampacity calculations.<\/li>\n<li>IEC 60445 \u2014 Basic and safety principles for man-machine interface, marking and identification. International color code and identification standards for electrical conductors.<\/li>\n<li>IEC 62153-1-1 \u2014 Test methods for measuring transfer impedance of shielded cables. Technical protocol for measuring electromagnetic shielding effectiveness at specified frequencies.<\/li>\n<li>LAPP Kabel \u00d6LFLEX CLASSIC 115 CY Technical Documentation \u2014 Original equipment manufacturer specifications, installation guidelines, and performance validation data.<\/li>\n<li>ASTM B8 \u2014 Standard specification for concentric-lay-stranded copper conductors. North American standard enabling conversion between metric and AWG conductor specifications.<\/li>\n<li>ASTM D412 \u2014 Standard test method for vulcanized rubber and thermoplastic elastomers\u2014Tension. Testing procedure for mechanical properties of cable jacket materials.<\/li>\n<li>ASTM D624 \u2014 Standard test method for tear resistance of rubber and elastomers. Mechanical durability testing for outer sheath materials.<\/li>\n<li>ISO 9001:2015 \u2014 Quality management systems. International standard for manufacturing quality assurance applicable to cable manufacturing facilities.<\/li>\n<li>EU Directive 2014\/30\/EU \u2014 Electromagnetic Compatibility Directive. Regulatory framework requiring CE marking and compliance verification.<\/li>\n<li>RoHS Directive 2011\/65\/EU \u2014 Restriction of Hazardous Substances. Environmental compliance standard limiting hazardous materials in manufactured products.<\/li>\n<\/ol>\n<\/section>\n\n<!-- ===== CONTACT ===== -->\n<section class=\"contact\">\n<h2>Contact Feichun Cable for \u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250 Direct Equivalent Shielded Control Cables and Industrial Applications Solutions <span class=\"cn\">\u8054\u7cfb\u98de\u7eaf\u7535\u7f06\u83b7\u53d6\u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250\u76f4\u63a5\u7b49\u6548\u5c4f\u853d\u63a7\u5236\u7535\u7f06\u4e0e\u5de5\u4e1a\u5e94\u7528\u65b9\u6848<\/span><\/h2>\n<p style=\"font-size:.88rem;color:var(--tx2);margin-bottom:4px\">For \u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250 direct equivalent shielded control cables, compact four-conductor control cable specifications, complete dimensional and electrical specifications, outer diameter tolerance specifications and acceptance criteria, copper weight index and total cable weight calculations, current carrying capacity and VDE 0298-4 ampacity calculations, derating factors for grouped and conduit installations, VDE 0250 and IEC 60228 Class 5 standards compliance verification, four-conductor shielded control cable configurations, EMC shielding effectiveness and braided copper shield performance, 300\/500V voltage rating and electrical safety specifications, impulse test voltage specifications and dielectric strength verification, tinned copper braid shielding performance and transfer impedance measurements, flame retardancy and IEC 60332-1-2 compliance verification, space-constrained installation routing and cable management solutions, high-density control panel wiring applications, factory automation equipment wiring, measurement and control technology system integration, data processing and instrumentation cable applications, machinery control circuit specifications, PLC and sensor networking cables, industrial automation systems integration, flexible Class 5 conductor stranding specifications, bending radius compliance and mechanical stress analysis, temperature range specifications for fixed and dynamic installations, cable reel and spool procurement quantities and weight calculations, material handling equipment planning, bulk ordering and volume discount pricing, fast-track delivery and inventory availability, direct equivalent cable sourcing and supply chain diversification, quality assurance and test certificates, certification documentation and standards compliance verification, installation compatibility verification, procurement strategies for major facility control panel wiring projects, engineering consultation for optimal cable specification selection, project support for industrial manufacturers and systems integrators, or any application requiring compact, lightweight, high-density shielded control cable delivery with absolute standards compliance and reliability in demanding factory automation and industrial control environments, contact our shielded control cable specialists directly. We provide detailed technical specifications, rapid quotation pricing, sample cables for compatibility testing, bulk procurement pricing with volume discounts, dedicated project support for large facility control panel installations, engineering assistance with cable specification optimization and system design, supply chain solutions combining multiple cable specifications into consolidated orders, quality verification documentation and test certificates, and complete project support from specification development through procurement, delivery, installation, testing, and commissioning. <span class=\"cn\">\u6211\u4eec\u4e3a\u00d6LFLEX CLASSIC 115 CY 4G1.5 VDE 0250\u5c4f\u853d\u63a7\u5236\u7535\u7f06\u63d0\u4f9b\u5b8c\u5168\u7b49\u6548\u7684\u76f4\u63a5\u66ff\u4ee3\u54c1\uff0c\u5177\u6709\u5353\u8d8a\u7684\u7d27\u51d1\u6027\u3001\u8f7b\u91cf\u5316\u548c\u6210\u672c\u4f18\u52bf\u3002<\/span><\/p>\n<div class=\"cg\">\n<div class=\"cc\"><div class=\"lb\">Shielded Control Cable Specifications<\/div><div class=\"vl\"><a href=\"mailto:Tech@feichuncables.com\" rel=\"nofollow\">Tech@feichuncables.com<\/a><\/div><\/div>\n<div class=\"cc\"><div class=\"lb\">VDE 0250 Equivalent Solutions<\/div><div class=\"vl\"><a href=\"mailto:Tech@feichuncables.com\" rel=\"nofollow\">Tech@feichuncables.com<\/a><\/div><\/div>\n<div class=\"cc\"><div class=\"lb\">Bulk Procurement &#038; Pricing<\/div><div class=\"vl\"><a href=\"mailto:Tech@feichuncables.com\" rel=\"nofollow\">Tech@feichuncables.com<\/a><\/div><\/div>\n<div class=\"cc\"><div class=\"lb\">WhatsApp Technical Support<\/div><div class=\"vl\"><a href=\"https:\/\/wa.me\/8613855123218\" rel=\"nofollow noopener\" target=\"_blank\">+86 138-5512-3218<\/a><\/div><\/div>\n<\/div>\n<\/section>\n\n<footer>\n<p>&copy; 2026 Feichun Cable. All rights reserved. <span class=\"cn\">\u7248\u6743\u6240\u6709\u3002<\/span><\/p>\n<p style=\"margin-top:5px\"><a href=\"https:\/\/feichuncables.com\" rel=\"nofollow\" target=\"_blank\" style=\"color:var(--ac)\">feichuncables.com<\/a><\/p>\n<\/footer>\n<\/div>\n<\/body>\n<\/html>\n","protected":false},"excerpt":{"rendered":"The \u00d6LFLEX CLASSIC 115 CY 4G1.5 cable represents a precision-engineered control cable where every dimensional and electrical specification has been optimized through extensive testing and field validation across diverse industrial applications. The 8.2-millimeter outer diameter establishes the space requirements for cable routing in panel layouts, cable trays, and conduit systems. To understand this specification in practical terms, consider that 8.2 millimeters is approximately the width of a standard pencil\u2014this compact size enables routing through narrow spaces between equipment, through small penetrations in enclosure walls, and through dense cable bundles where space is precious. The 4G1.5 designation specifies that the cable contains four conductors, each with a 1.5 square millimeter cross-sectional area, meaning each conductor is composed of fine copper wire strands twisted together in a flexible Class 5 stranding pattern. One of these four conductors is the distinctive green-yellow (dual-color) protective earth\/ground conductor, while the other three are typically color-coded according to VDE 0293-308 standards (often black, brown, and grey for three-phase applications, or black, brown, and blue for single-phase applications). The current carrying capacity is approximately 18 amperes under standard conditions (30\u00b0C ambient air temperature, cables routed in free air rather than enclosed in conduit or cable trays), establishing the maximum safe electrical load for any single conductor. The voltage rating of 300\/500V classifies this as a control-voltage cable rather than a high-voltage power cable, appropriate for control circuits, instrumentation systems, and signaling applications rather than main power distribution.","protected":false},"author":1,"featured_media":8258,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"csco_singular_sidebar":"left","csco_page_header_type":"title","csco_page_load_nextpost":"","footnotes":""},"categories":[66,165,464],"tags":[984,45137,45136,45140,45142,1021,45135,1617,42976,15727,45110,1034,43701,45139,4237,22598,5569,45145,6374,44876,774,18217,22233,40989,17305,45143,1044,45141,8845,1106,45144,35414,45091,15519,9923,2289,10031,45146,796,45134,30319,19194,22647,1600,22604,22602,45138,22614,20053,22611],"class_list":["post-8257","post","type-post","status-publish","format-standard","has-post-thumbnail","category-common-problems-encountered-in-cable-applications","category-drag-chain-cable","category-flexible-cables-with-high-bending-life-and-fatigue-resistance","tag-300-500v-cable","tag-5-core-4mm-cable","tag-5g4-cable","tag-assembly-line-wiring","tag-automated-production-line","tag-automation-cable","tag-awg-12-cable","tag-cable-bending-radius","tag-cable-outer-diameter","tag-cable-specification","tag-ce-certified-cable","tag-control-cable","tag-copper-index","tag-copper-wire-braid","tag-current-carrying-capacity","tag-cy-cable","tag-electrical-engineering","tag-electrical-wiring","tag-emc-shielded-cable","tag-factory-automation-wiring","tag-flame-retardant-cable","tag-flexible-control-cable","tag-flexible-pvc-cable","tag-galvanized-steel-braid","tag-heavy-duty-control-cable","tag-iec-60364-standard","tag-industrial-cable","tag-industrial-control-panel-wiring","tag-industrial-machinery-cable","tag-industrial-power-cable","tag-lapp-1125505","tag-lapp-cable","tag-lapp-olflex-2","tag-machine-tool-wiring","tag-manufacturing-equipment-cable","tag-mechanical-protection-cable","tag-motor-connection-cable","tag-multi-core-cable-2","tag-oil-resistant-cable","tag-olflex-classic-110-sy","tag-power-and-control-cable","tag-pvc-cable","tag-robotics-cable","tag-rohs-compliant-cable","tag-steel-wire-braided-cable","tag-sy-cable","tag-transparent-pvc-cable","tag-unshielded-cable","tag-vde-standard-cable","tag-yy-cable","cs-entry"],"_links":{"self":[{"href":"https:\/\/feichuncables.com\/blog\/wp-json\/wp\/v2\/posts\/8257","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/feichuncables.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/feichuncables.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/feichuncables.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/feichuncables.com\/blog\/wp-json\/wp\/v2\/comments?post=8257"}],"version-history":[{"count":2,"href":"https:\/\/feichuncables.com\/blog\/wp-json\/wp\/v2\/posts\/8257\/revisions"}],"predecessor-version":[{"id":8260,"href":"https:\/\/feichuncables.com\/blog\/wp-json\/wp\/v2\/posts\/8257\/revisions\/8260"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/feichuncables.com\/blog\/wp-json\/wp\/v2\/media\/8258"}],"wp:attachment":[{"href":"https:\/\/feichuncables.com\/blog\/wp-json\/wp\/v2\/media?parent=8257"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/feichuncables.com\/blog\/wp-json\/wp\/v2\/categories?post=8257"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/feichuncables.com\/blog\/wp-json\/wp\/v2\/tags?post=8257"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}