[email protected]

кабельный барабан

15 Min Read
LIFT-2S (European) vs. LIFT-1S UL (North American): LIFT-2S characteristics: Voltage: 300/500V (European standard, lower voltage) Temperature: −40°C to +70°C (moderate range) Standards: VDE 0482 part 265-2-1, EN 50265-2-1, IEC 60332-1-2 Design philosophy: Safety by material redundancy (2 steel cores) Steel cores: 2× cores provide mechanical backup Conductor: Class 6 (European, ~150–200 wires per mm²) Cost: Lower (proven European manufacturing) Market: Europe, Asia-Pacific, most of world LIFT-1S UL characteristics: Voltage: 600V (North American standard, higher voltage) Temperature: −25°C to +105°C (extreme range, high-temp optimized) Standards: UL 2562, UL 62, CSA C22.2 No.210.2 Design philosophy: Safety by certification (single core + redundant control) Steel core: 1× core (sufficient with nylon covering) Conductor: Class M (UL, extra fine ~300+ wires per mm²) Cost: Higher (UL testing, certification documentation) Market: North America (USA, Canada), Mexico UL 2562 specialty certification: UL 2562 scope: Elevator and Dumbwaiter Cables Specific requirements: 1. Pendant cable design (cable hangs freely, no duct support) 2. Vertical orientation (designed for gravity-loaded suspension) 3. Repeated flex cycles (cable moves up/down frequently) 4. Safety-critical function (failure = personnel risk) Consequence: More stringent than general-purpose cables Testing includes: Bend cycle fatigue, heat aging, compression resistance Test procedures (unique to UL 2562): Bend cycle test: 1,000+ cycles at minimum bending radius Cable must pass insulation resistance after cycling Heat aging: 500+ hours at 105°C continuous Tensile strength retention minimum 70% Compression: 1,000+ hours under sustained compression Cable cross-section must not exceed 5% permanent deformation LIFT-2S (no UL 2562): Tests per VDE are less stringent on fatigue/cycling Assumes cable mostly static, not repeated flex Adequate for European elevator duty (lower speed, fewer cycles) LIFT-1S UL: All UL 2562 tests passed (proven for North American elevators) Faster cycle times, more frequent motion → more fatigue stress Extra testing ensures reliability under North American elevator duty Market requirement (regulatory): Europe/International: CE mark required (European conformity) VDE/EN/IEC standards sufficient No UL certification needed (not recognized in EU) LIFT-2S is sufficient North America (USA, Canada): UL certification mandatory for elevators UL 2562 specifically for elevator cables CSA dual certification required in Canada LIFT-2S NOT acceptable (lacks UL 2562) LIFT-1S UL mandatory Cost implication: UL certification: ~$5,000–15,000 per product per region Testing duration: 3–6 months per model Documentation: Comprehensive test reports, technical files Result: LIFT-1S UL 20–30% higher cost than equivalent European cable
Technical Department
on15/06/2026

Техническая информация PANZERFLEX: монтаж, эксплуатация, радиусы изгиба, кабельные барабаны и электрические расчёты

Данный технический раздел объединяет ключевые рекомендации по обращению, хранению, монтажу и электрическому расчёту гибких мобильных кабелей PANZERFLEX, PANZERLITE, PANZERFLAT, PANZERFLEX-ELX и BASKETHEAVYFLEX. Его задача — дать инженеру, проектировщику и монтажной команде практическую основу для правильного выбора cable handling system, расчёта bending radius, настройки tension protection, выбора cable reel, устранения twist, проверки current carrying capacity, short circuit current и voltage drop.
12 Min Read
FLEXIFESTOON® NE-FLAT (NGFLGÖU): Advanced High-Flexibility Anti-Salt Fog Port Cable for Maritime Cargo Handling and Marine Automation Systems Feichun's revolutionary FLEXIFESTOON® NE-FLAT NGFLGÖU flat cable combines extreme high-flexibility architecture with marine-grade anti-salt fog protection, engineered specifically for port automation infrastructure, cargo-handling festoon systems, and maritime equipment control requiring superior corrosion resistance and mechanical reliability through thousands of bending cycles in aggressive saltwater environments.
Technical Department
on15/06/2026

PANZERFLAT-ELX 3,6/6–12/20 kV — плоский H.V. reeling cable с оптическими волокнами или без них

PANZERFLAT-ELX — это плоский гибкий средневольтный H.V. reeling cable для cable reel systems и festoon systems, предназначенный для подключения подвижных частей machine tools и material handling equipment. Кабель может выполняться с интегрированными optical fibres или без них, объединяя силовую передачу и, при необходимости, data transmission в одной плоской динамической конструкции.
14 Min Read
BASKET SPREADER 740 (YSLTOE) is engineered specifically for hoisting and control applications where mechanical flexibility and electrical reliability must coexist in marine environments. Unlike load-bearing structural cables (which prioritize tensile strength), control cables emphasize: Conductor flexibility – Repeated bending over pulleys without mechanical fatigue Insulation integrity – Voltage breakdown resistance under salt-fog corrosion Mechanical damping – Rope-like flexibility to drape naturally in spreader bar frames Environmental barrier – Outer sheath blocks salt, moisture, and UV penetration Core Design Elements: Component Material Specification Function Port Environment Benefit Conductor Flexible red copper Class 6 (IEC 60228) Carries 300/500V power; enables bending flexibility High purity copper resists galvanic corrosion Insulation PVC type YI2 (IEC 60811) Electrical isolation; voltage breakdown resistance (2 kV test) PVC with marine additives prevents salt-induced tracking Central Unit Aramide yarns (Kevlar™ equivalent) Mechanical load-bearing backup; structural integrity Aramide resists moisture & salt; absorbs vibration stress Outer Sheath PUR type 11YM1 (DIN 73377) Environmental barrier; UV/ozone/moisture protection Superior salt-fog resistance; 20+ year marine lifespan
Technical Department
on15/06/2026

PANZERFLEX-ELX + OF 3,6/6–12/20 kV — средневольтный H.V. reeling cable с интегрированными оптическими волокнами

PANZERFLEX-ELX + OF — это гибкий средневольтный комбинированный кабель для кабельных барабанов и festoon-систем, объединяющий силовую передачу и оптическую передачу данных в одной динамической конструкции. Кабель предназначен для movable parts of machine tools и material handling equipment, включая stacker/reclaimer, ship-to-shore crane, container crane и excavators. Он рассчитан на cable reel systems с высокими и экстремальными механическими нагрузками, частыми изгибами, торсионной работой, быстрым движением и сильным ускорением.
12 Min Read
FLEXIFESTOON® PV-FLAT UL: High-Flexibility Salt-Fog Resistant Flat Festoon Cable for Port Operations, Marine Equipment, and Harbor Automation Systems Feichun's FLEXIFESTOON® PV-FLAT UL establishes a new performance paradigm for port-duty electrical infrastructure by combining three critical engineering requirements into unified cable architecture: extreme mechanical flexibility enabling 5×D minimum bending radius and 120 m/min festoon deployment on container gantries and ship loaders; comprehensive salt-fog environmental resistance through specialized PVC compound formulation with enhanced corrosion inhibitors surviving ASTM B117 salt-spray testing protocols characteristic of extreme coastal and offshore environments; and verified 600V/2000V dual-voltage certification (UL 1581, CSA approved) supporting both power distribution and precision automation signal transmission across the world's most demanding port and maritime cargo-handling operations.
Technical Department
on15/06/2026

PANZERFLEX-ELX 3,6/6–12/20 kV (N)TSCGEWÖU — гибкий H.V. кабель для средневольтных систем reeling и festooning

PANZERFLEX-ELX — это средневольтный гибкий силовой кабель для кабельных барабанов и festoon-систем, рассчитанный на подключение подвижных частей тяжёлого оборудования. Кабель предназначен для stacker/reclaimer, ship-to-shore crane, container crane, excavators, machine tools и другого material handling equipment, где присутствуют высокие и экстремальные механические нагрузки, частые изгибы, торсионные воздействия, быстрое движение и сильное ускорение.
5 Min Read
(N)GRDGÖU-J Nomenclature (VDE 0250 part 813): (N) = Nominal voltage prefix (0.6/1 kV implicit in designation) G = Gummiert (rubber-insulated) R = Rubber outer sheath D = Dynamisch (dynamic/flexing application) G = Gummiert inner sheath (intermediate layer) Ö = German standard designation (ö indicates European origin) U = Unarmoured (no metal sheath) J = Jacked (multi-sheath design: intermediate + outer) Full meaning: Rubber-insulated, rubber-sheathed, dynamic-rated, multi-sheath construction, unarmoured festoon cable VDE 0250 part 813 scope: Published by: VDE (Verband der Elektrotechnik, German standards body) Applies to: Flexible cables for crane installations (particularly festoon systems) Coverage: Voltage, temperature, mechanical properties, installation methods Festoon-specific requirements: - High bending flexibility (4×D minimum typical) - Fast rewind capability (240+ m/min rated speed) - Sustained torsion tolerance (±25°/1m continuous) - Extended temperature range (−50 to +80°C) - UV/ozone/moisture resistance (outdoor exposure) Alternate designations (similar cables): IEC 60811-1-1: International equivalent (less specific) DIN VDE 0298 part 3: German mechanical property standard DIN VDE 0482-265-2-1: German flame test standard EN 50265-2-1: European flame test equivalent GRDGÖU-J advantage: Combines all standards into single VDE designation Procurement simplified for European buyers
Technical Department
on12/06/2026

PANZERFLEX-L 0,6/1 kV (N)SHTÖU-J / -O: резиновые силовые кабели для кабельных барабанов и фестонных систем

PANZERFLEX-L 0,6/1 kV (N)SHTÖU-J / -O — это гибкие силовые резиновые кабели, предназначенные для подвижных механизмов, кабельных барабанов и фестонных систем, работающих при высоких механических нагрузках, частом изгибе, кручении, быстром движении и сильном ускорении.
11 Min Read
FLEXIFESTOON® SEOOW YELLOW represents FeiChun's entry into the low-voltage festoon and temporary power market. The nomenclature requires careful explanation to distinguish this product from the high-voltage FLEXIDRUM series: FLEXIFESTOON Product Nomenclature: FLEXIFESTOON® = Product family name Flex = Flexible (emphasis on bending & handling) Festoon = Strung overhead in continuous runs (typical festoon lighting application) SEOOW = Industry-standard designation S = Service cord (temporary, not permanent installation) E = Elastomer jacket (flexible sheath) OO = Oil-resistant conductor insulation (TPE qualifies as oil-resistant) W = Weather-resistant sheath (water, ozone, UV resistant) SEOOW is defined in: UL 62 (Standard for Flexible Cords and Cables) CSA 22.2 No. 49 (Canadian equivalent) NFPA 70 National Electrical Code (NEC) Article 400 YELLOW designation: Color: RAL 1021 (traffic yellow, high visibility) Safety significance: Yellow cords attract attention in job sites Practical purpose: Easy to identify, prevent trips/entanglement Contrast with FLEXIDRUM series: FLEXIDRUM (High-Voltage MV Cable): Voltage: 3.6 kV to 20/35 kV (power distribution) Temperature: −40 to +80°C (standard industrial) Application: Mobile mining/tunneling equipment (capital-intensive) Size: Large diameter, heavy (3–12 kg/km) FLEXIFESTOON (Low-Voltage Service Cord): Voltage: 600V (light/power temporary use) Temperature: −60 to +105°C (extreme environmental range) Application: Festoon lighting, temporary site power, outdoor events Size: Small diameter, lightweight (0.05–0.3 kg/m) Cost: Consumer/contractor-grade (not specialty industrial)
Technical Department
on11/06/2026

Что такое ÖLFLEX® 191K: инженерный анализ гибкого многожильного AWM-кабеля UL STYLE AWM 21098

ÖLFLEX® 191K — это гибкий многожильный AWM-кабель с UL STYLE AWM 21098 и cRU AWM I/II A/B FT1, предназначенный для plant engineering, industrial machinery, air-conditioning systems и других сред, где применяются общие многожильные AWM-кабели. Его конструкция основана на тонкопроволочных медных жилах класса 5, ПВХ-изоляции и ПВХ-наружной оболочке серого или чёрного цвета. Кабель рассчитан на AC 600 V, испытательное напряжение AC 2000 V и температурный диапазон до +90°C.
12 Min Read
FLEXIDRUM® MEDIUM RS-T: Advanced Anti-Twisting Cable for Mining Excavators and Heavy-Duty Industrial Applications A comprehensive technical analysis of Feichun's purpose-engineered anti-twisting cable platform (1.8/3 kV to 18/30 kV voltage grades) featuring specialized synthetic yarn torsion protection, tinned copper conductors, EPR Type 3GI3 insulation, and tear-resistant wrapping technology—delivering exceptional mechanical durability in open-cast mining environments characterized by extreme mechanical abrasion, dynamic cable movement, and continuous torsional stress exposure.
Technical Department
on11/06/2026

Что такое ÖLFLEX® CONTROL 35T: технический анализ кабеля управления и инженерное сравнение с высокогибкими шахтными кабелями Feichun

ÖLFLEX® CONTROL 35T — это TISI-маркированный ПВХ-кабель управления на 300/500 В для базовых промышленных применений: стационарная прокладка, а также редкое свободное изгибание без растягивающей нагрузки. Именно эта формулировка делает его полезной отправной точкой для инженера: по ней легко понять, где заканчивается зона применения обычного ПВХ-кабеля управления и где начинается задача для кабеля другого класса — высокогибкого, тягово-устойчивого, износостойкого и рассчитанного на горнодобывающую или портовую подвижную технику.